Advertisement
Quick Links
DF-31/EC
DOOR/WINDOW
SENSOR
For Use with DF-16/EC
Security Console
Installation
Instructions
(760) 438-7000 • FAX (760) 438-7043
www.linearcorp.com
4. PROGRAM SENSOR INTO CONSOLE
START IN
OFF MODE
ENTER YOUR
PRESS
ENTER AN
SECRET CODE
LEARN
UNUSED SENSOR
NUMBER
LEARN BUTTON
1
PRESS SENSOR
OR MOVE MAGNET
HOLD OFF BUTTON
TO SEND SIGNAL
FOR 3 SECONDS WHEN
FINISHED TO EXIT
LEARN MODE
8. TEST SENSOR
SENSOR LIGHT
SHOULD
OPEN DOOR
GLOW FOR
OR WINDOW
TWO SECONDS
CONSOLE IN
CHIME MODE
SHOULD DING-DONG
1. SENSOR & MAGNET DETAIL
SENSOR HAS BUILT-IN SWITCH ON SIDE WITH NOTCH.
MAGNET CAN ACTIVATE SWITCH UP TO 1/2" AWAY.
WHEN MOUNTING SENSOR, ALIGN MAGNET TO NOTCH.
REMOVE PLASTIC BATTERY TAB
PRIOR TO INSTALLATION BY
PULLING STRAIGHT OUT
NOTCH ON
SIDE OF
SENSOR
ALIGN MAGNET
NEXT TO NOTCH
ON SENSOR
MAGNET
1/2" SPACE
MAXIMUM
5. EXAMPLE SENSOR MOUNTING ON DOOR
SEND SIGNAL
FROM SENSOR
MOUNT SENSOR
PLATE TO FRAME
1/2" MAXIMUM
SPACE BETWEEN
SENSOR AND
MAGNET PLATES
SNAP SENSOR ONTO
MOUNTING PLATE
9. LABEL SENSORS
STATUS INDICATOR
SHOULD LIGHT
WHEN SENSOR IS OPEN
1
USE LABELS PROVIDED
TO IDENTIFY SENSORS
2. SET SENSOR SWITCH
SENSOR
SET SWITCH TO DELAYED
FOR ENTRY/EXIT DOOR
SET SWITCH TO INSTANT
FOR WINDOWS OR
NON-ENTRY DOORS
6. EXAMPLE SENSOR MOUNTING ON WINDOW
MOUNT SENSOR
PLATE TO FRAME
SPACE BELOW
PLATE IS REQUIRED
TO SNAP SENSOR
ONTO PLATE
1/2" MINIMUM
ALIGN MAGNET
PLATE NEXT TO
SNAP SENSOR ONTO
SENSOR PLATE
MOUNTING PLATE
AND ATTACH TO
DOOR
10. CHANGING BATTERIES
WHEN CONSOLE INDICATES A SENSOR
LOW BATTERY, OPEN SENSOR CASE AND
GENTLY LIFT UP END OF BATTERY CLAMP,
SLIDE BATTERIES OUT
NOTE: USE OF EXCESSIVE FORCE ON
BATTERY CLAMP WILL RESULT IN DAMAGE
LIFT
IF NECESSARY
PUSH IN SLOT TO REMOVE
SENSOR FROM MOUNTING PLATE
3. EXAMPLE SENSOR LOCATIONS
MAGNET
ON WINDOW
SENSOR
ON FRAME
7. OPTIONAL MAGNET SPACER
ALIGN MAGNET
PLATE NEXT TO
SENSOR PLATE
AND ATTACH TO
WINDOW
HOOK SPACER TO
MAGNET PLATE
AND ROTATE TO
LOCK IN PLACE
R&TTE VAEE 28357, EMC, SFT, ETS
Linear Corporation declares that the apparatus DF-31/EC
complies with the essential requirements and other relevant
provisions of Directive 1995/5/EC.
INTERNATIONAL WARRANTY
This Linear product is warranted against defects in material and workmanship for twelve (12) months. The
Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale customers who
buy direct from Linear or through Linear's normal distribution channels. Linear does not warrant this product
to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer's warranty, if
any. There are no obligations or liabilities on the part of Linear Corporation for consequential damages
arising out of or in connection with use or performance of this product or other indirect damages with
respect to loss of property, revenue, or profi t, or cost of removal, installation, or reinstallation. All implied
warranties, including implied warranties for merchantability and implied warranties for fi tness, are valid only until
Warranty Expiration Date as labeled on the product. This Linear Corporation Warranty is in lieu of all other
warranties express or implied.
For warranty service on Linear equipment return product, at sender's expense to: Linear Hong Kong
19/F Hounor Industrial Centre,6 Sun Yip Street Chai Wan, Hong Kong Attention: Repairs Department
REPAIRS POLICY
Charges will be made for equipment that is not of warranty, shows customer abuse, or is damaged by the effects
of lightning, water, fi re, or other abnormal happenings.
+
Customer's equipment sent in for repair may be repaired or replaced with new or remanufactured equipment
at Linear's discretion.
-
The customer is always responsible for shipping and handling charges to the repairs facility. Linear will pay return
+
shipping and handling charges on "in warranty" products shipped back to the customer. The customer will be
-
billed for the return shipping and handling charges on "out of warranty" products.
There will be a 50% expedite fee for any express requests.
The International Sales Manager must be notifi ed prior to the return of product to Linear. All international returns
INSTALL TWO
must have an International Repair Authorization number (IRA#). The number must be marked on all packages.
DURACELL
Failure to do so will cause delays in processing.
IMPORTANT !!!
TYPE DL 2032
Linear radio controls provide a reliable communications link and fi ll an important need in portable wireless
BATTERIES (+)
signaling. However, there are some limitations which must be observed.
SIDE UP
The radios are required to comply with local rules and regulations as radio devices. As such, they have limited
transmitter power and therefore limited range.
A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals that
occur on or near their operating frequencies, regardless of code settings.
REMOVE BATTERIES
Changes or modifi cations to the device may void regulatory compliance.
FROM THIS END
Infrequently used radio links should be tested regularly to protect against undetected interference or fault.
A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or
dealer, and these facts should be communicated to the ultimate users.
Copyright © 2003 Linear Corporation
SENSOR
ON FRAME
MAGNET
ON DOOR
USE SPACER WHEN
SURFACES ARE
UNEVEN
220837 A
Advertisement
