Advertisement
5. CONNECT CABLE
AM/II
O
1
KEYPAD IN
B
O
1
AM-KP
PWR GND DAT1 DAT0 DVAL CLK
FOR LOCAL POWER, DISCONNECT RED WIRE FROM "PWR" CONNECTION
ON AM-KP AND CONNECT EXTERNAL 12 VDC SUPPLY (+ TO PWR & - TO GND)
NOTE: AM/II
MUST BE CONNECTED TO AM-KP "GND"
8. PROGRAM SYSTEM
6. SET DEVICE ADDRESS
O
1
O
1
B
O
1
B
EACH REMOTE DEVICE
MUST BE SET TO A
UNIQUE NUMBER
FROM 1 TO 6
ARROW ON SLOT
POINTS TO NUMBER
9. TEST KEYPAD
USE A SMALL SCREWDRIVER
TO SET THE DEVICE ADDRESS SWITCH
1
2
3
4
5
6
7
8
9
*
0
#
7. SECURE & LOCK CASE
HOOK KEYPAD
ONTO BACKPLATE
USE KEY TO
LOCK KEYPAD
LINEAR LIMITED WARRANTY
This Linear product is warranted against defects in material and workmanship for twelve
(12) months. The Warranty Expiration Date is labeled on the product. This warranty
extends only to wholesale customers who buy direct from Linear or through Linear's
normal distribution channels. Linear does not warrant this product to consumers.
Consumers should inquire from their selling dealer as to the nature of the dealer's
warranty, if any. There are no obligations or liabilities on the part of Linear
corporation for consequential damages arising out of or in connection with use
or performance of this product or other indirect damages with respect to loss of
property, revenue, or profit, or cost of removal, installation, or reinstallation. All
implied warranties, including implied warranties for merchantability and implied
warranties for fitness, are valid only until Warranty Expiration Date as labeled on the
product. This Linear Corporation Warranty is in lieu of all other warranties express
or implied.
All products returned for warranty service require a Return Product Authorization
Number (RPA#). Contact Linear Technical Services at 1-800-421-1587 for an RPA#
and other important details.
Copyright © 2000 Linear Corporation
211560 D
Advertisement
