Page of 2
Download Bookmark Comment

Linear AM-KP User Manual

Linear door user manual.
Hide thumbs
   
INTRODUCTION
1. AM-KP FEATURES
The AM-KP keypad is designed for use with Linear's
AM/II access control system. The keypad is housed in a
rugged cast aluminum enclosure. The die-cast keys have
bright, easy-to-read yellow graphics. Each key has a
AM-KP
positive tactile "click" feel when pressed. An internal
sounder signals when a key is pressed.
1
2
3
The keypad can be mounted to a pedestal or directly to
Access
4
5
6
a wall. A keylock secures the keypad to the mounting
Control
7
backplate.
8
9
1
2
3
*
Keypad
0
An incandescent panel lamp lights the keypad for
#
4
5
6
nighttime use. Red, green and yellow indicators show
7
8
9
power, access and lockout conditions.
*
0
#
The AM-KP is normally powered from the AM/II control,
Installation
or can be powered locally from a 12 VDC power supply.
Instructions
Robust static and lightning protection circuits safeguard
the keypad's electronics.
A rotary switch selects the keypad's device address.
Each device connected to the AM/II must be set to a
different device address.
(760) 438-7000 • FAX (760) 438-7043
USA & Canada (800) 421-1587 & (800) 392-0123
Toll Free FAX (800) 468-1340
www.linearcorp.com
2. PLAN INSTALLATION
3. MOUNT BACKPLATE
4. ROUTE CABLE
EACH AM-KP KEYPAD EQUALS 9 LOAD UNITS
PLAN THE LOCATIONS
FOR CONTROL AND
APARTMENTS
CABLE LENGTH FORMULA FOR EACH KEYPAD USED IN SYSTEM
REMOTE DEVICES
CABLE RUN
CABLE TYPE
FORMULA
PLAN CABLE RUNS
BETWEEN CONTROL
300 FEET MAXIMUM
BELDEN 9931 (24 AWG)
FEET x LOAD UNITS < 3,000 MAXIMUM
AND REMOTE DEVICES
APARTMENT GATE
INSTALLATION
500 FEET MAXIMUM
WEICO 9405 (20 AWG)
FEET x LOAD UNITS < 10,000 MAXIMUM
AM/II
HOMERUN WIRE
AM-KP
CONTROL
ON
EACH KEYPAD
PEDESTAL
(1000 FEET WIRE MAXIMUM
AM/II
PEDESTAL
ALLOWED IN SYSTEM)
MOUNT BACKPLATE WITH
CONTROL
SECURITY BOLTS AND LOCKNUTS
LOBBY
CHIEF
ENG.
SERVICE
AM-KP
ACCESS
KEYPADS
LAB
ENGINEERING
BATH
BATH
CARD
READERS
COPIER
(USING AM-CRI
WALL MOUNTING
AREA
INTERFACE)
STOR.
SALES
USE CONCRETE
WEDGE ANCHORS
OR MOLLY ANCHORS
COMPUTER
COMMERICAL
ROOM
V.P.
INSTALLATION
V.P.
PURCH.
SALES

   Related Manuals for Linear AM-KP

   Summary of Contents for Linear AM-KP

  • Page 1: Access Control

    V.P. PURCH. SALES INTRODUCTION The AM-KP keypad is designed for use with Linear’s AM/II access control system. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easy-to-read yellow graphics. Each key has a positive tactile “click” feel when pressed. An internal sounder signals when a key is pressed.

  • Page 2

    AM-KP PWR GND DAT1 DAT0 DVAL CLK FOR LOCAL POWER, DISCONNECT RED WIRE FROM "PWR" CONNECTION ON AM-KP AND CONNECT EXTERNAL 12 VDC SUPPLY (+ TO PWR & - TO GND) NOTE: AM/II MUST BE CONNECTED TO AM-KP "GND" 8. PROGRAM SYSTEM 6.

Comments to this Manuals

Symbols: 0
Latest comments: