Download Print this page

Lindy 10/100/1000Mbps PCI User Manual

10/100/1000mbps pci gigabit ethernet adapter

Advertisement

Quick Links

10/100/1000Mbps PCI
Gigabit Ethernet Adapter
User's Manual

Advertisement

loading

Summary of Contents for Lindy 10/100/1000Mbps PCI

  • Page 1 10/100/1000Mbps PCI Gigabit Ethernet Adapter User’s Manual...
  • Page 2: Fcc Compliance Statement

    FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits of a Class B computing devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful...
  • Page 3 Introduction Thank you for purchasing our Gigabit Ethernet Adapter. This guide is to provide the installation and usage of this adapter for network installers and users. The Gigabit network adapter complies to 64-bit or 32-bit PCI specification and supports half-/full- duplex feature which can double network speed.
  • Page 4 Features & Specifications (1) Features & Benefits Supports 64/32-bit, 66/33MHz PCI Local Bus Master Version 2.2/2.1. Comply with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x. Supports IEEE 802.3x full duplex flow control. Supports Wake On LAN power management function. Plug and Play installation, auto-setup IRQ and I/O address.
  • Page 5 (2) Technical Specification Topology : Star Connector : RJ-45 Standard : IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT Transmission Rate : 10Mbps/20Mbps 100Mbps/200Mbps 1000Mbps/2000Mbps Hardware Required : IBM compatible PC with available PCI slot (PCI 2.2/2.1), 64-/32-bit, 66/33MHz IRQ Line : Assigned by system I/O Address...
  • Page 6: Driver Installation

    Installation (1) Hardware Installation To insert the network adapter into your PC, follow the steps as below : 1. Turn off the computer and remove its cover. 2. Insert the adapter into a PCI slot. 3. Secure this adapter to the rear of the computer chassis and put back the computer cover.
  • Page 7 Trouble-shooting If you experience any problems with the adapter, please make sure the appropriate driver is loaded, the proper cable is connected to the adapter port and the hub/switch complies with the adapter specification, such as 10Mbps 10BaseT, 100Mbps 100BaseTX 1000BaseT, then check the LED.
  • Page 8 TRADEMARKS Copyright 2004/2005 by the manufacturer of this product. No part of this manual may be reproduced, transcribed, stored in a retrieval system, translated into any language or computer language without the prior written consent of the manufacturer. All brand and product names are trademarks and/or registered trademarks of their respective companies.