Elevated Hearth Systems - Heat & Glo SL-550TR-E Owner's Manual

E. Elevated Hearth Systems
Use the table below to identify the hearth system that will be used. The table will also help identify effects on the various
dimensions. Some hearth systems will elevate the appliance off the fl oor at a given dimension. For example, if appliance
will be used with a Kenwood Cabinet with Base, the appliance will be elevated 9-1/4 in. The 9-1/4 in. elevation will also
have to be added to the following: Wall penetration referenced in Figure 8.2 (Wall penetration) and Rough Opening Height
(header height) referenced in Figure 5.2. Note: Finished fl oor thickness should also be considered when determining in-
stallation dimensions.
MODEL DESCRIPTION
KENWOOD CABINET
KENWOOD CABINET W/ BASE
KENWOOD CORNER CABINET
SL-550
KENWOOD CORNER CABINET W/ BASE
KENWOOD MANTEL
KENWOOD MANTEL W/ BASE
LUNA SURROUND
KENWOOD CABINET
KENWOOD CABINET W/ BASE
KENWOOD CORNER CABINET
SL-750 KENWOOD CORNER CABINET W/ BASE
KENWOOD MANTEL
KENWOOD MANTEL W/ BASE
LUNA SURROUND
KENWOOD MANTEL
SL-950
KENWOOD MANTEL W/ BASE
Note 1. Add dimensions to Wall Penetration (Figure 8.2) and Rough Opening Height (Figure 5.2).
Note 2. Verify Marble Cut Lengths on site prior to cutting.
Note 3. Dimensions assume use of a 3/4 in. Hearth Pad.
64
PART #
KDC44SBP
KDC44SBP W/ HTKDC44SBP
KDA44SBP
KDA44SBP W/ HTKDA44SBP
AFKDMPA
AFKDMPA W/ HTKDMPA
LUNA-32-GY
KDC48DBP
KDC48DBP W/ HTKDC48DBP
KDA48SBP
KDA48SBP W/ HTKDA48SBP
AFKDMPB
AFKDMPB W/ HTKDMPB
LUNA-36-GY
AFKDMPC
AFKDMPC W/ HTKDMPC
Heat & Glo • SL-550 / 750 / 950TR-E • 2118-900 Rev. U • 7/12
ELEVATED APPLIANCE
DIMENSION
See Note 1
0
9-1/4 in.
0
9-1/4 in.
0 (See Note 3)
9 1/4 in.
1-1/6 in.
0
9-1/4 in.
0
9-1/4 in.
0 (See Note 3)
9-1/4 in.
1-1/16 in.
0 (See Note 3)
9-1/4 in.
MARBLE LEG CUT
LENGTH
See Note 2
29-3/8 in.
29-3/8 in.
29-3/8 in.
29-3/8 in.
27-3/8 in.
29-3/8 in.
N/A
32-7/8 in.
32-7/8 in.
32-7/8 in.
32-7/8 in.
27-3/8 in.
29-3/8 in.
N/A
32-7/8 in.
32-7/8 in.