Spool Gun Connection - Lincoln Electric IDEALARC SP-250 Service Manual

C-4

SPOOL GUN CONNECTION

CAUTION
CAUTION: The spool gun module is intended for use
with Lincoln Electric Magnum Spool Guns only. Use
with other units may cause damage to the equipment.
For Spool Gun operation, refer to the instruction man-
ual provided with the Magnum Spool Gun.
1. Connect the spool gun control cable 6-pin plug to
mating receptacle on the front of the spool gun
adapter connection box.
NOTE: If using a K469 spool gun with 4-pin plug, use
the K518 adapter.
2. Insert the Twist-Mate plug into the mating recepta-
cle on the front of the connection box and twist to
lock the connection.
3. Attach the spool gun gas line to the gas outlet fit-
ting on the front of the connection box.
4. Refer to the Instruction Manual included with the
K487 or K469 Spool Gun for more detail in Spool
Gun set-up and operation.
Figure C.5 - Spool Gun Connect.
ACCESSORIES
IDEALARC SP-250
C-4