Accessories; Replacement Parts - Lincoln Electric SP-100 Service Manual

C-1
LINCOLN GAS REGULATOR KITS
The Lincoln K463 CO
Gas Regulator and Hose Kit is recommend-
ed for use with the SP100.
K463 CO
The K463 kit includes a preset, non-
adjustable pressure flow regulator for use
on CO
flow regulator is preset at the factory to pro-
vide a flow rate of 20 cubic feet per hour (10
l/min). This setting cannot be changed. Also
included is a 10 foot (3,0 m) gas hose which
connects to the rear of the SP-100.
The K463 CO
be used with a cylinder of argon mixed gas
if a CGA-580-320 (Western Enterprises No.
810) adapter is used between the cylinder
and the regulator.
Weld shielding gas may be obtained from a
welding supply distributor.
K499 Ar-Mixed Gas Regulator
K499 Ar-Mixed Gas Regulator and Hose Kit
– Includes a preset, non-adjustable pres-
sure and flow regulator for use on argon-
mixed gas cylinders. Also included is a 10
foot (3 0 m) gas hose which connects to the
rear of the SP-100.
INNERSHIELD WELDING KITS
0.035 (0.9 mm) Innershield Welding Kit
– Includes a contact tip, a gasless nozzle
and a cable liner to permit the SP-100 gun
and cable to use a 0.035" (0,9 mm) dia-
meter flux-cored electrode. Also included
is a spool of 0.035 (0,9 mm) Innershield
NR-211-MP.
Two kits are available:
K549-1 kit is for use with Magnum 100L
gun (with red trigger).
K464 kit is for use with the original
Lincoln Electric gun (with black trigger).
DRIVE ROLL
M15448-1 Reversible Drive Roll with double
knurled grooves for 0.035 (0,9 mm) cored
electrode.
SP-100

ACCESSORIES

or K499 Ar-mixed
2
Regulator
2
cylinders. The K463 CO
2
pressure-flow regulator can
2
K467 INPUT LINE CORD
The K467 Input Line Cord is the same as
the line cord supplied with the SP-100, but
has a NEMA type 5-20P plug for use on 25
amp branch circuits.
To install optional features, refer to in-
structions included with the kit.
pressure-
2

REPLACEMENT PARTS

Complete Gun and Cable Assembly
L7538 – Black Trigger; L8311-2 (K530-2) –
Red Trigger
Contact Tip 0.025" (0,6 mm)
S18704-1 – Black Trigger; S19726-1 – Red
Trigger
Contact Tip 0.030" (0,8 mm)
S18704-2 – Black Trigger; S19726-2 – Red
Trigger
Contact Tip 0.035" (0,9 mm)
S18704-3 – Black Trigger; S19726-3 – Red
Trigger
Liner 0.023 - 0.030" (0,6 - 0,8 mm)
S18704-4 – Black Trigger; M16291-2 – Red
Trigger
Liner 0.035" (0,9 mm)
S18704-5 – Black Trigger; M16291-1 – Red
Trigger
Gas Diffuser
S18704-6 – Black Trigger; S19728 – Red
Trigger
Gas Nozzle
S18704-7 – Black Trigger; M16294 – Red
Trigger
Gasless Nozzle (Innershield Only)
S18704-14 – Black Trigger; M16418 – Red
Trigger