Maintenance; Safety Precautions; Routine Maintenance; Periodic Maintenance - Lincoln Electric LN- 25 IM10084 Operator's Manual

D-1

SAFETY PRECAUTIONS

WARNING
ELECTRIC SHOCK can kill.
• Turn the input power OFF at the
welding power source before
installation or changing drive
rolls and/or guides.
• Do not touch electrically live
parts.
• When inching with the gun trigger, electrode and
drive mechanism are "hot" to work and ground
and could remain energized several seconds
after the gun trigger is released.
• Do not operate with covers, panels or guards
removed or open.
• Only qualified personnel should perform mainte-
nance work.
-----------------------------------------------------------------------

ROUTINE MAINTENANCE

• Check weld cables, control cables and gas hoses
for cuts.
• Clean and tighten all weld terminals.

PERIODIC MAINTENANCE

• Clean drive rolls and inner wire guide and replace if
worn.
• Blow out or vacuum the inside of the feeder.

MAINTENANCE

LN-25™ IRONWORKER
D-1