Accessories; General - Lincoln Electric GMA WIRE FEEDERS LN-7 Operator's Manual

C-1

GENERAL

The following is a list of the accessories that can be
used with the LN-7 GMA wire feeder.
Product Number
K162-1**
K163**
K419**
K418**
K417**
K320**
K303**
M-11514
K1840-10
K1841-25
K1841-50
K1842-10
K1842-35
K1842-60
K1842-110
K126**
K115**
K112**
K113**
K497*
K470*
K471*
K527**
K494**
K1818-10
K1797-25
K1797-50
K1798
K1803-1
*Magnum GMA welding guns require a K466-1 connector for use with the LN-7 GMA wire
feeder.
**A detailed description of each item is given later in this section.

ACCESSORIES

TABLE C.1 – LN-7 GMA ACCESSORIES.
Name
Spindle Kit-Two inch Hub
Undercarriage
Burnback timer kit
GMA Timer Kit
Digital voltmeter kit
Flux tank
50-60 lb Wire reel mounting stand
Wire reel dust shield door for K303
Weld Power Cables:
Twist-Mate to Lug- 1/0, 350A, 60% Duty Cycle, 25 ft.
Twist-Mate toTwist Mate- 1/0, 350A, 60% Duty Cycle, 25 ft.
Twist-Mate toTwist Mate- 2/0, 350A, 60% Duty Cycle, 25 ft.
Lug to Lug-3/0, 600A, 60% Duty Cycle, 10 ft.
Lug to Lug-3/0, 600A, 60% Duty Cycle, 35 ft.
Lug to Lug-3/0, 600A, 60% Duty Cycle, 60 ft.
Lug to Lug-4/0, 600A, 60% Duty Cycle, 110 ft.
Welding Guns:
Innershield gun - 350 Amps
Innershield welding gun - 450 Amps
Submerged arc welding gun - 500 Amps
Submerged arc welding gun - 600 Amps
Magnum GMA welding gun - 200 Amps
Magnum GMA welding gun - 300 Amps
Magnum GMA welding gun - 400 Amps
Water solenoid kit
Gas solenoid valve kit (Included on LN-7 GMA)
Wire Feeder Control Cable - 10 ft.
Wire Feeder Control Cable Extensions Requires K1818-10
Wire Feeder Control Cable Extensions Requires K1818-10
Adapter Cable for Control Cable to Terminal Strip Power Source
Work and Wire Feeder Power Cables Package
LN-7 & LN-7 GMA
C-1