Lightolier E4 Series Specification Sheet

Page 1 of 2
The E4 Series provides egress lighting in a wide variety of wattages. The classical steel housing and high performance electronics make the units ideal for commercial or light industrial
applications.
18W - 50W Lead Calcium & Nickel
Cadmium
6.0"
15.2 cm
7.3"
18.5 cm
14.0"
35.6 cm
Complete Fixture consists of unit and two lamp heads. * Select options and accessories below.
How to Specify:
E4
SERIES VOLTAGE
E4 = Steel Emergency 1 = 6V
Lighting Unit 2 = 12V
Features
1. Illumination: Allows up to three mounted lamp heads. The standard lamp
head incorporates a high performance parabolic reflector with a wedge base
tungsten lamp. Allows maximum spacing between units along a path of
egress.
2. Housing: Constructed of 20 gauge (18-100w) or 18 gauge (125w) steel with
a white corrosion-resistant, epoxy powder coat finish. Easily mounted with
keyhole slots or shelf mounting. Universal j-box mounting pattern on 18-50w
units.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed lead calcium battery has an estimated
service life of 5 years, and an operating temperature range of 65°F (19°C) to
85°F (30°C). Maintenance free, sealed nickel cadmium battery has an esti-
mated service life of 10 years, and an operating temperature range of 20°F
(-7°C) to 95°F (35°C).
5. Input Power Requirements:
6 & 12 Volt Units
18-50 watt units: .15A (120 VAC), .65A (277 VAC)
75-125 watt units: .50A (120 VAC), .22A (277 VAC)
12 Volt Units
150-250 watt units: .67A (120 VAC), .29A (277 VAC)
Code Compliance
UL 924 listed.
Options
SD = Self-Diagnostics
SA = Self-Diagnostics with Alarm
V = Voltmeter
1
A = Ammeter
1
T1 = 120 VAC Time Delay
(15 minutes)
T2 = 277 VAC Time Delay
(15 minutes)
Lightolier is a Philips group brand
75W - 100W Lead Calcium
6.0"
15.2 cm
8.8"
22.4 cm
3.0"
12.5"
7.6 cm
31.8 cm
1
BATTERY/
1
DC WATTAGE
6V, Lead Calcium
18L = 18W
25L = 25W
36L = 36W
50L = 50W
75L = 75W
10L = 100W
12L = 125W
6V, Nickel Cadmium
25N = 25W
50N = 50W
E4 Series Emergency Lighting
6 Volt or 12 Volt, 18 to 250 Watts Steel Housing
125W Lead Calcium
6.0"
15.2 cm
12.0"
30.5 cm
5.4"
13.7 cm
40.6 cm
# OF SUGGESTED
LAMP HEADS LAMP HEADS
3 = Three 6V, Tungsten, Wedge Base
2 = Two RT6 = 5.4W
1 = One RT7 = 7.2W
Blank = No Heads RT9 = 9W
Options (continued)
LCK1 = Line Cord (6', 120 VAC field installed)
F1 = 120 VAC Fuse
F2 = 277 VAC Fuse
P1 = 120 VAC Power Switch
P2 = 277 VAC Power Switch
DC = DC Power Switch
ST = Special Input Transformer
Multiple option configurations may void UL listing. Consult factory for specifics.
Accessories
WG5 = Wire Guard
(36-100w lead calcium, 25-50w nickel cadmium)
WG = Wire Guard
(125-250w lead calcium, 100-150w nickel cadmium)
MLSHELFW = White Mounting Shelf
MJSHELFW = White Mounting Shelf
MXSHELFW = White Mounting Shelf
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • F0308
7.6"
16.0"
19.3 cm
W
HOUSING
C0LOR
W = White
NOTES:
1) Not available for use with SD, SA and SDTD options.
(specify voltage and frequency)
(36-50w lead calcium, 25-50w nickel cadmium)
(75-100w lead calcium)
(125-250w lead calcium, 100-150w nickel cadmium)
Type:
E4