Setting The Meter - Lifescan OneTouch Ultra Owner's Booklet

Setting the Meter Time, Date, and
the Unit of Measure
®
The OneTouch
date preset. Check that the time, date, and the unit of
measure are set correctly. If you need to change the
time, date, or unit of measure; follow the instructions
for changing the settings or call the OneTouch®
Customer Care Line at 1 800 663-5521. You may also
need to enter the setting mode if you remove the
battery.
To set the time, date, or unit of measure, you must
enter the setting mode. Start with the meter off. Then
press and hold the M button for three seconds. The
meter is now in the setting mode.
STEP 1
With the hour setting flashing, press and
release the C button to advance one hour.
To move faster, hold the C button down.
With the correct hour on the display, press
the M button and the minutes setting will
start flashing.
Before setting the date, you must have
first set the time.
®
Ultra Meter comes with the time and
Set the Hour.
40