Lifescan OneTouch Ultra Owner's Booklet page 38

Plasma-Calibrated Result
CAUTION: It is important to discard the used lancet carefully.
Accurate Results in Just 5 Seconds
STEP 3
Your blood glucose test result will appear
after the meter counts down from N to A.
Blood glucose test results are automatically
stored in the meter memory. You may also
record them in the logbook provided with
your system. Turn the meter off by removing
the test strip. Dispose of used test strip in a
sealed container.
Used Lancet Disposal
STEP 1 Remove the Sampler Cap.
Twist the cap counterclockwise. (Optional:
Replace the protective disk on the used
lancet by placing it on a hard surface and
pushing the lancet tip into the disk.)
STEP 2 Eject the Lancet.
Point the sampler down and away. Push
forward on the ejection/cocking control and
eject the lancet directly into a container for
sharp objects. Return the ejection/cocking
control to the middle position. Replace
the cap.
32