Assembly - Ariens 926001-ST926LE Owner's/Operator's Manual

Ariens sno-thro owner/operator manual
Table of Contents

Advertisement

WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
WARNING: Dropping or tipping over boxed
unit could result in personal injury or damage
to unit.
PACKAGE CONTENTS
1
4
3
1. Sno-Thro Unit
2. Discharge Chute
3. Chute Rod
Figure 3

ASSEMBLY

Tools Required:
• Pliers
• Open-End Wrenches: 3/8, 7/16, 1/2,
9/16 in. and/or Adjustable Wrench
• Tire Gauge
ASSEMBLY
2
OS7020
4. Literature Pack with
Extra Shear Bolts
Unfold Handlebar (Figure 4)
1. Remove the lower and loosen the upper wing
knobs on the handlebar assembly.
2. Loosen the wing nuts on the shift rod.
3. Put the speed selector lever in the first forward
position.
4. Rotate the handlebars into operating position.
5. Install and tighten all wing knobs and wing nuts
on the handlebar assembly and shift rod.
NOTE: The handlebar has two height positions. Adjust
the handlebar height to provide better operator
comfort. See Handlebar Height on page 22.
5
4
1
2, 3
1. Wing Knobs
2. Wing Nut
3. Bolt
GB - 9
1
4. Shift Rod
5. Speed Selector
Lever
Figure 4
OS7030

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents