Adjust Attachment Clutch Cable Spring Extension - Ariens 921004 - ST924DLE Owner's/Operator's Manual

Ariens snow blower owner/operator manual
Hide thumbs Also See for 921004 - ST924DLE:
Table of Contents

Advertisement

OS7189
Roller should be 1/2 –7/8 in. (12.7 – 22.2
mm) from the frame when the attachment
clutch is engaged.
Figure 35
Adjust the Attachment Clutch Cable
Spring Extension
1. Check the attachment clutch cable
spring extension.
Measure the length of the attachment
clutch cable spring with the clutch lever
disengaged.
Then measure the attachment clutch
spring with the clutch lever engaged.
See Figure 36.
If spring extension is within the
specified range, go to Check
Attachment Brake on page 30.
If spring extension is outside of
specified range, go to step 2.
2. Adjust cable length (see Figure 36).
a. Loosen jam nut on cable.
b. To increase spring extension
adjust barrel down the cable and
tighten jam nut.
c. To decrease spring extension
adjust barrel up the cable and
tighten jam nut.
3
4
1. Engine Sheave
2. Attachment Drive Belts
3. Belt Finger
4. Attachment Belt Idler
5. Attachment Idler Adjustment Nut
GB - 29
1/2 – 9/16 in.
(12.7 –- 14.3 mm)
Figure 36
2
1
5
Figure 37
OS7184
OS7183
OS7194
OS7221

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents