Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Brinkmann Manuals
  4. Grill
  5. 810-3250-K
  6. Owner's manual

Brinkmann 810-3250-K Owner's Manual

Brinkmann 810-3250-k dual zone charcoal grill
Hide thumbs

Advertisement

Quick Links

Download this manual
Dual Zone Charcoal Grill
OWNER'S MANUAL
ASSEMBLY AND OPERATING IN STRUC TIONS
SAVE THIS MANUAL FOR FUTURE REFERENCE
MODEL 810-3250-K
WARNING
NOTICE TO INSTALLER:
HAZARDOUS EXPLOSION MAY RESULT IF THESE WARNINGS AND INSTRUCTIONS ARE
LEAVE THESE INSTRUCTIONS
IGNORED. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL
WITH THE GRILL OWNER FOR
TO AVOID PERSONAL INJURY, INCLUDING DEATH OR PROPERTY DAMAGE.
FUTURE REFERENCE .
WARNING
CAUTION! Do not use spirit or petrol for lighting or re-lighting.

Advertisement

loading

Related Manuals for Brinkmann 810-3250-K

Summary of Contents for Brinkmann 810-3250-K

  • Page 1 Dual Zone Charcoal Grill OWNER’S MANUAL ASSEMBLY AND OPERATING IN STRUC TIONS SAVE THIS MANUAL FOR FUTURE REFERENCE MODEL 810-3250-K WARNING NOTICE TO INSTALLER: HAZARDOUS EXPLOSION MAY RESULT IF THESE WARNINGS AND INSTRUCTIONS ARE LEAVE THESE INSTRUCTIONS IGNORED. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL WITH THE GRILL OWNER FOR TO AVOID PERSONAL INJURY, INCLUDING DEATH OR PROPERTY DAMAGE.
  • Page 2 TABLE OF CONTENTS: General Warnings ..........2-3 Operating Instructions .

  • Page 3: General Warnings

    GENERAL WARNINGS: WARNING WARNING • Only use this grill on a hard, level, non-combustible, stable surface (concrete, ground, etc.) capable of supporting the weight of the grill. Never use on wooden or other sur fac es that could burn. • DO NOT use grill without charcoal ash tray in place. DO NOT attempt to remove charcoal ash tray while tray contains hot coals.
  • Page 4 • Store the grill out of reach of children and in a dry location when not in use. • Do not attempt to service grill other than normal main te nance as explained in “After-Use Safety” and “Proper Care & Maintenance” sections of this manual. Repairs should be performed by The Brinkmann Corporation only.
  • Page 5 CURING YOUR GRILL: Prior to your first use of the Brinkmann Dual Zone Charcoal Grill, follow the in struc tions below carefully to preheat your grill. Curing your grill will rid the grill of paint odor that can impart unnatural flavors to the first meal prepared on your Brinkmann Dual Zone Charcoal Grill.
  • Page 6 IMPORTANT: To protect your grill from excessive rust, the unit must be properly covered at all times when not in use. YOUR BRINKMANN DUAL ZONE CHARCOAL GRILL IS NOW PREHEATED AND READY FOR USE. WARNING • CAUTION! Do not use spirit or petrol for lighting or re-lighting.
  • Page 7 GRILLING/SEARING: 1. Lightly coat all interior surfaces of the Dual Zone Charcoal Grill including cooking grills with vegetable oil or vegetable oil spray. Do not coat charcoal grates or charcoal ash tray. 2. Follow the instructions below carefully to build a fire. You may use charcoal and/or wood as fuel in the Dual Zone Charcoal Grill (see “Adding Charcoal/Wood During Cooking”...

  • Page 8: Flavoring Wood

    FLAVORING WOOD: To obtain your favorite smoke flavor, ex per i ment by using chunks, sticks or chips of flavor producing wood such as hickory, pecan, apple, cherry, or mesquite. Most fruit or nut tree wood may be used for smoke flavoring.
  • Page 9 AFTER-USE SAFETY: WARNING WARNING • Always allow grill and all components to cool completely before handling. • Never leave coals and ashes in grill unattended. Make sure coals and ashes are completely extinguished before removing. • Before grill can be left unattended, remaining coals and ashes must be removed from grill. Use caution to protect yourself and property.

  • Page 10: Assembly Instructions

    READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEM BLING THIS UNIT. The following tools are required to assemble this Brinkmann Dual Zone Charcoal Grill: • Screwdriver PART LIST:...
  • Page 11 Inspect contents of the box to ensure all parts are included and undamaged. FOR MISSING OR GRILL WARRANTY REPLACEMENT PARTS, PLEASE VISIT US ONLINE AT: (Proof of purchase will be required.)
  • Page 12 Make sure you have all items listed under PARTS LIST and PARTS CARD CONTENTS before you begin the installation process. PARTS CARD CONTAINS: Qty. Qty. M6 X 28 mm Shoulder Bolts M5 X 12 mm Bolts Cotter Pins M5 X 11 mm Shoulder Bolts Bottom Pivots 12 M6 X 50 mm Bolts Top Pivots...
  • Page 13 Choose a good, cleared assembly area and get a friend to help you put your grill together. Lay card board down to protect grill finish and assembly area. CAUTION! Some parts may contain sharp edges. Wear protective gloves if necessary. Step 1 Attach left and right side panels to legs using eight M6 X 12 mm...
  • Page 14 Step 3 Attach back panel to legs using four M6 X 12 mm bolts. Back Panel Note: With the help of a friend, turn the cart upside down. Try to minimize the stress to the legs. M6 X 12 mm Bolts Locking Brake Lock Casters...
  • Page 15 Step 6 Attach one door stop to grill body using two M6 X 15 mm flat head bolts. Attach other door stop to cart base using two M6 X 15 mm flat head bolts. Door Stop M6 X 15 mm Flat Head Bolts M6 X 15 mm Flat Head Bolts...
  • Page 16 Step 8 M6 X 12 mm Bolts Attach one handle support using two M6 x 12 mm bolts. Then insert Handle cart door handle into handle support Support and attach other handle support using two M6 x 12 mm bolts. Repeat for the other handle.
  • Page 17 Step 10 Place bottom door pivot into the holes in cart base. Align the top of the door with the hole in the door WARNING CAUTION! Do not use spirit or petrol for lighting or re-lighting. bracket and insert top door pivot, tighten securely.
  • Page 18 Step 13 Insert four M6 X 12 mm bolts halfway into left cart legs (image 1) Align the left side table keyholes on the bolts and slide down to lock into place and tighten bolts (image 2). Insert left side drawer into left side table (image 3).
  • Page 19 Step 15 Insert the crank through hole in cooking chamber. With handle pointing down secure with one M5 X 12 mm bolt. Repeat for other crank. M5 X 12 mm Bolt Crank Step 16 Attach grill door handle and door locking plate using one Grill Door Handle pre-attached M10 nut.
  • Page 20 Step 17 Warming Rack Attach warming rack brackets Brackets using eight M6 X 12 mm bolts through grill body assembly. WARNING CAUTION! Do not use spirit or petrol for lighting or re-lighting. Warming Rack Bracket Cooking Grills Step 18 Place cooking grates in grill as illustrated.
  • Page 21 Step 20 Attach air vent damper to the left inside of grill lid using one M5 X 11 mm M5 X 11 mm shoulder bolt and M5 Shoulder Bolts Air Vent Damper nut. Secure vent cover to the unit. Do not over tighten the nut as this will make the vent difficult to open and close.
  • Page 22 Step 23 Attach charcoal ash tray handle to Charcoal Ash charcoal ash tray using two Tray Handle M6 X 12 mm bolts and M6 nuts. Charcoal Ash Tray Step 24 Insert charcoal ash tray into tracks Tracks on back side of grill. Charcoal Ash Tray...
  • Page 23 Brinkmann 3250 (Assembled) WARNING CAUTION! Do not use spirit or petrol for lighting or re-lighting.
  • Page 24 • This warranty does not cover surface scratches or heat damage to the finish, which is considered normal wear. • The Brinkmann Corporation may elect to repair or replace damaged units covered by the terms of this warranty. • This warranty extends to the original purchaser only and is not trans fer able or assignable to subsequent purchasers.