Reset ("Cancel - Drain"); Changing Basic Features (On Selected Units); Entering Special Programs And Coding - Bosch SHE55P Repair Manual

3.2 Reset ("Cancel – drain")
To reset, push Cancel-Drain or Cancel-Reset buttons at the same
time.
3.3

Changing basic features (on selected units)

On some models, features can be changed on the fascia panel.
3.3.1 Extra dry heat
With Extra Dry Heat, the temperature of the rinse water can be
raised and the drying time increased for improved drying.
 Turn the dishwasher off and then push and hold the left
Cancel Reset button while turning the dishwasher on –
release buttons when the display shows "0" or "1".
 Pushing the left Cancel Reset button changes the setting –
choose "1" to turn it on and choose "0" to turn it off. Push the
on/off button to save the setting.
702_58300000148618_ara_en_a
3.3.2 End of cycle tone
The End of cycle tone volume can also be changed.
 Turn the dishwasher off and then push and hold the right
Cancel Reset button while turning the dishwasher on –
release buttons when a tone sounds or the right Cancel Reset
button LED lights up.
 Pushing the right Cancel Reset button changes the setting –
push it until the tone is at the desired volume (or the tone
stops if it's to be turned off). Push the on/off button to save
the setting.
3.4

Entering special programs and coding

Controls contain codes for sales demo mode, factory tests,
customer service test program, dishwasher configuration and
error codes. Consult test programs and error codes for your
dishwasher before using the codes listed in this manual.
Page 7 of 42