Programmed Play; Random Play - Street Beat CD-10 Operating Instructions Manual

PLAYING CD TRACKS IN PROGRAMMED ORDER OR
IN RANDOM ORDER

1.Programmed play

You can make a program of up to 20 tracks in the order you want them to be played.
RANDOM button
REPEAT/PROGRAM button
1. Turn on the CD player by rotating the VOLUME/POWER
OFF switch downward past click. Make sure the CD is
stopped.
2. Press the REPEAT/PROGRAM button. The letters "
and the PLAY/PROG. lamp will flash.
3. Press or to select the track you want to program in
the order you want.
4. Press the REPEAT/PROGRAM button to confirm. The
letters " " and the PLAY/PROG. lamp will flash.
5. Repeat above steps 3 and 4. You can program up to 20 tracks,
then the display will show the track numbers you programmed.
6. Press PLAY/PAUSE button to start programmed play. The
PLAY/PROG. lamp will flash.
NO TE:
1. Programming can only be done while in STOP mode.
2. The programmed memory will be lost if the STOP button is pressed twice or the power
is shut off, or the CD door is opened.
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button twice.

2.Random play

To play the songs in random order
Press the RANDOM button in STOP mode or during playing, the set will play all of the
songs in random order. The floating symbol "
track number will show in turn in the display.
To resume normal play
Press the RANDOM button again, the player will start playing normally.
IB-CD10(SL)-WM-E-050705.pmd
PLAY/PAUSE button
SKIP/SEARCH buttons
8
9
STOP button
VOL UME/OFF
sw itch
REPEAT
POWER
PLAY/PROG.
"
REPEAT
POWER
PLAY/PROG.
REPEAT
POWER
PLAY/PROG.
"and the current
IB-CD10(SL)-WM-E-052605
5/26/2005, 9:23 AM