Playing A Cd - Street Beat CD-10 Operating Instructions Manual

PLAYING A CD

OPEN button
Connect the supplied AC power cord or batteries (refer to page 4).
1
POWER
OFF
V
O
L
U
M
E
2
3
4
PLAY/PAUSE
NOTE: In order to avoid the music playing too loudly, we suggest you switch the
volume limiter switch (in the battery compartment) to the ON position before playing
the set. If you want to increase the volume even more, you can stop play and switch
the volume limiter switch to OFF position.
TIP: "
" will show in the display if there is no CD disc in the CD compartment or the
CD disc is inserted the wrong way or not "clicked" onto the spindle.
IB-CD10(SL)-WM-E-050705.pmd
Rotate the VOLUME/POWER
OFF switch (on the right side of
the set) downwards past the click
to turn on the set, the POWER
lamp will be on, the display will show
2 dashes " " flashing, then "
Press the OPEN button to open
the CD door and place a CD into
the CD compartment. The label
s ide of the CD s hould fac e
outward. Make sure the disc is
seated on the spindle by pressing
down in the center (clicks into
place).
Close the CD DOOR by pushing
the "close" area of the door. The
display will show the total tracks
of that CD.
Press the CD PLAY/PAUSE
button, the PLAY/PROG. lamp will
be steadily on, the player will play
all the music tracks once.
5
6
PLAY/PAUSE
button
VOLUME/POWER OFF
switch (at the right side
of the set)
REPEAT
POWER
PLAY/PROG.
".
REPEAT
POWER
PLAY/PROG.
example (disc with
15 songs)
REPEAT
POWER
PLAY/PROG.
Track number playing
IB-CD10(SL)-WM-E-052605
5/26/2005, 9:23 AM