3 609 929 A85.book Seite 1 Mittwoch, 15. März 2006 11:10 11 General Power Tool Safety Warnings Read all safety warnings and all 3) Personal safety instructions. Failure to follow the a) Stay alert, watch what you are doing and warnings and instructions may result in electric use common sense when operating a shock, fire and/or serious injury.
3 609 929 A85.book Seite 2 Mittwoch, 15. März 2006 11:10 11 c) Disconnect the plug from the power 6) Service source and/or the battery pack from the a) Have your power tool serviced by a quali- power tool before making any adjust- fied repair person using only identical re- ments, changing accessories, or storing placement parts.
Penetrating a water line causes Never allow children to use the machine. property damage or may cause an electric Bosch can only guarantee a flawless function- shock. ing of the machine if the original accessories Caution! Sparks can also reach combustible intended for it are used.
Page 10
3 609 929 A85.book Seite 4 Mittwoch, 15. März 2006 11:10 11 Product Features Intended Use The numbering of the product features refers to With a firm support of the cutting guide, the ma- the illustration of the power tool on the graphics chine is intended to cut or slot mainly mineral ma- page.
Page 11
Prevents uncontrolled restarting of the machine The machine can be plugged directly into the re- after an interruption in the power supply. ceptacle of a Bosch general-purpose vac with re- The mains supply remains interrupted and the mote starting control. The vac starts automati- service indicator 11 lights up.
Page 12
3 609 929 A85.book Seite 6 Mittwoch, 15. März 2006 11:10 11 Operating Instructions Wear safety glasses, hearing protection and a dust protection mask. Wear protective gloves and sturdy shoes. The machine may only be used for dry machin- ing of masonry. Pre-select the cutting depth, as described in the same-named section.
In case of a claim, repair or purchase of replace- ment parts or in case of queries or other prob- After finishing work, disassemble the diamond lems, please contact your local dealer or Bosch cutting discs and clean the clamping parts and representative.