Lennox Hearth Products MPE-36R Installation Instructions And Homeowner's Manual page 14

Power On/Off Wall Switch Installation
(optional kit, see page 18)
Wire the wall switch prior to installing the fi replace.
WALL SWITCH WIRING (24 VAC):
Install Wall Switch per instructions provided with kit and per the following information:
1. Turn off circuit breaker.
2. Remove cover plate located on the left side of appliance.
3. Locate the 2 red wires and pull out the length needed to reach wall switch (15 feet max.).
4. Connect the red wires to the wall switch as shown in Figure 26. Follow instructions provided with wall switch kit.
Figure 25
14
Red
Red
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Red
Red
Red
5V
Red