Lennox Hearth Products MPE-36R Installation Instructions And Homeowner's Manual page 13

Installing Wall Thermostat
(optional kit, see page 18)
Wire the wall thermostat prior to installing the fi replace.
WALL THERMOSTAT WIRING (24 VAC):
Install Wall Thermostat per instructions provided with kit and per the following information:
1. Turn off circuit breaker.
2. Remove cover plate located on the left side of appliance.
3. Locate the the black and white wires and pull out the length needed to reach wall thermostat (15 feet max.).
4. Connect the wires to the wall thermostat as shown in Figure 25. Follow instructions provided with wall switch kit.
Black
White
Figure 25
Wall Thermostat
Left Side of
Fireplace
White
Black
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
White
5 V
Black
13