Lennox Hearth Products Elite Series, Merit Series, Merit Plus Series 3-Piece Louver Kit Installation Instructions

iNSTALLATiON iNSTRUcTiONS FOR LOUVeR ASSeMBLY KiTS FOR USe
WiTH MeRiT ™, MeRiT PLUS ™, OR eLiTe ® SeRieS GAS FiRePLAceS
Polished Brass Brushed Stainless
cat. # Model cat. #
88L27 LVR24PB-2 88L31
88L28 LVR35PB-2 88L32
88L29 LVR40PB-2 88L33
88L30 LVR45PB-2 88L34
26M45 LVR33MPB 26M46
H7024 LVR22PB H7025
Table 1
GeNeRAL iNFORMATiON
These louver assembly kits may be used with Merit ™ , Merit Plus ™ or
Elite ® series gas fireplaces. Kit applications are shown in Table 1.
KiT cONTeNTS:
1 ea. Top louver assembly panel
1 ea. Bottom louver assembly panel
1 ea. Nameplate logo -
not used on short panel of EDVPF, EDVCR, EDVCL, EDPF(-2), EDCR(-2) & EDCL(-2)
1 ea. Installation Instructions
Bottom Louver
Lennox
Nameplate
Figure 1 - Louver Kit Contents
Painted
Model
LVR24BS 88L23 LVR24c-2
LVR35BS
LVR40BS 88L25 LVR40c-2
LVR45BS
LVR33MBS
LVR22BS
Top Louver
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
750,119M
Rev. B 03/2008
LOUVER SET KITS
eDVPF, eDPF(-2), eDVcR, eDcR(-2), eDVcL, eDcL(-2), eBVPF, eBPF(-2), eBVcR, eBcR(-2), eBVcL,
eBcL(-2), eBBAY
eDV3530, eD3530, MPD3530, MPD35ST, MPD35PF, MPB35ST
eDV4035, MPD4035, eDVST, eDVPF, eDVcR, eDVcL, eBVST, eBVPF, eBVcR, eBST, eBPF, eBBAY,
eBcL, eBcR
eDV4540, eD4540-2, MPD4540
MDR3328, MDT3328, MPDT3328, MPDR3328
MPD35PF
iNSTALLATiON iNSTRUcTiONS
Note: Do not operate fireplace without the eyebrow installed in its normal
position. See Figure 2 for models with louvers or Figure 3 for models
with radiant panels.
Figure 2 - Louvered Face
Figure 3 - Clean Face
LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
3-Piece LOUVeR ASSeMBLY KiTS
Models Where Used
Top of Appliance
Louver Assembly
Top of Door Frame
Hood must be installed as shown.
Top of Appliance
Top Radiant Panel
Top of Door Frame
Hood must be installed as shown.