La Crosse Technology WS-7215U-IT Instruction Manual page 11

Wireless 915 mhz radio-controlled temperature station
Table of Contents

Advertisement

Note: When in the 12-hour format "P.M." will appear to the left
of the hour in the time LCD between the hours of noon and
midnight.
6. Press and release the SET button to confirm and advance to
the time setting.
VIII.
TIME SETTING
There are two methods by which the time and date can be set:
A) Automatically via WWVB reception, or
B) Manually.
A. WWVB (Remote Control Time)
This method requires you to do nothing, except wait for the signal to be
received, and to select a time zone. Reception usually takes
approximately 15 minutes during optimal conditions. The best
condition for reception is at night, between midnight and 6:00 am—
when there is less atmospheric interference. To keep your time as
accurate as possible, the Wireless Temperature Station conducts a
WWVB search every night between these hours, and overrides any
manually set time. The WWVB tower icon (appearing in the TIME
LCD) will flash when a signal-search is in progress and a signal is
being received, and will remain steady when the signal has been
received. If the WWVB time has not been received after 15 minutes of
battery installation, you may manually set the time or leave the time
function alone (reception will occur regardless).
B. MANUAL TIME SETTING
Note: When in the 12-hour format "P.M." will appear to the left of the
hour in the time LCD between the hours of noon and midnight.
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the time LCD and the number setting will
flash.
3. Press and release the SET button five times.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents