Hdvf-20A Viewfinder (Optional) - Sony PMW-500 Operation Manual

Solid-state memory
Hide thumbs Also See for PMW-500:
Table of Contents

Advertisement

Displays the type of data currently shown in the
time counter, as follows.
TCG: Recorded timecode
TCR: Playback timecode
UBG: Recorded user bits
UBR: Playback user bits
CNT: Counter
CLK: Time display (when the PRESET/REGEN/
CLOCK switch is set to CLOCK)
When the HOLD button is pressed to hold the
timecode value, the timecode is displayed in the
format shown below. When the HOLD button is
pressed again to release the hold, the timecode is
displayed in the normal format.
The three dots indicates that timecode is
displayed in the hold mode.
j Warning indicator area
Displays warnings when trouble with recording
or moisture condensation occurs.
For details, see "Operation Warnings" on page 153.
k Remaining media capacity indicator
Shows bar segments indicating the remaining
capacity of recording media in the slots.
l Remaining battery capacity indicator
Shows bar segments indicating the remaining
battery capacity.

HDVF-20A Viewfinder (Optional)

a Plug
Connect to the VF connector (20-pin) on the
camcorder.
b Stopper
Prevents the viewfinder from coming off the
camcorder when it is slid from side to side.
c Camera operator tally indicator
Lights up while camcorder is recording. This
indicator can be covered when not in use.
This indicator also flashes to indicate warnings, in
the same manner as the tally indicator and the
REC indicator in the viewfinder.
d Eyecup
e Indicators and status display
For details, see "Status Display on the Viewfinder
Screen" on page 26.
f Diopter adjustment ring
Allows for optimal focus adjustment.
g Tally indicator
Lights up while camcorder is recording. Set the
TALLY switch to OFF when not in use. The
brightness can also be adjusted with the TALLY
switch.
Locations and Functions of Parts and Controls
25

Advertisement

Table of Contents
loading

Table of Contents