Time, 12/24 Hour Mode And Date Setting - La Crosse Technology Wireless 433 MHz Weather Station with Sun/Moon Time WS-8015U Instruction Manual

B. Time, 12/24 Hour Mode and Date Setting
The WWVB signal will override any manual set time and date information. The
time will be based on the time zone selected.
1. Press and hold the "SET" button for 1 second.
2. The hour is now flashing.
3. Press and release the "+" or "–" button to select the current hour.
Note: In 12h mode "PM" will appear to the left of the time during PM hours.
If the time is not within the PM hours nothing will be displayed. Be sure to set
the time to the correct AM/PM time to ensure automatic reception.
4. Press the "SET" button to advance to the minute
5. The minute is now flashing.
6. Press and release the "+"or "–" button to select the current
minute.
7. Press and release the "SET" button to advance to the 12/24-hour
setting.
8. "12" is now flashing.
9. Press and release the "+"or "–" button to select either 12 (am/pm)
or 24 hour (military) time format.
10. Press and release the "SET" button to advance to the year setting.
11. The year is now flashing.
12. Press and release the "+"or "–" button to select the current year.
13. Press and release the "SET" button to advance to the month
setting.
14. The month is now flashing.
15. Press and release the "+"or "–" button to select the current
month.
16. Press and release the "SET" button to advance to the date setting.
17. The date is now flashing.
18. Press and release the "+"or "–" button to select the current date.
19. Press and release the "SET" button to advance to the location
setting (skip steps 1 and 2 in section B if continuing).
9