Lcd Contrast - La Crosse Technology Wireless 433 MHz Weather Station with Sun/Moon Time WS-8015U Instruction Manual

16. Press and release the "+"or "–" button to select the storm warning
setting. This can be set to 0.09, 0.12, 0.15, 0.18, 0.21, 0.24, or 0.27
inHg (from 3 to 9 hPa). This setting will determine how much of a
drop in air pressure over six hours will sound the storm warning
alarm.
17. Press and release the "SET" button to advance to the storm
warning alarm on/off setting.
18. The storm warning on or off setting will now flash (AOFF
default/factory setting).
19. Press and release the "+"or "–" button to select whether or not the
storm warning alarm is activated.
20. Press and release the "SET" button to advance to the LCD setting
(skip steps 1 and 2 in section F if continuing).
G. LCD Contrast
1. Press and hold the "SET" button for 1 second.
2. Press and release the "SET" button 17 times.
3. The LCD contrast setting will now flash (4 is the default/factory
setting).
4. Press and release the "+"or "–" button to select the contrast level
desired (from 1 to 8).
5. Press and release the "SET" button to advance to the LI setting.
6. The LI setting will now flash (ON is the default/factory setting).
7. Press and release the "+"or "–" button to select ON or OFF.
8. Press and release the "SET" button to exit the programming mode.
Note: The LI setting does not affect the function of the indoor weather
station and is present only for future use.
16