Ringing Tone; Loudspeaker Volume; Selection Mode - Siemens HiPath 1120 Instruction Manual

Ringing tone

The ringing tone can be ajusted by changing the tone /melo-
dy (6 levels).
#=E/ F 5=D 6= K
-

Loudspeaker volume

The speaker volume in the E822 ST can be ajusted during
conversation.
- << D >> +

Selection mode

If your HiPath 1100 system is not working for energy blackout
and the external line was switched to your telephone E 822
ST or E 821 ST, it will be necessary to ajust the selection type
for this line.
When working normally, the PBX is responsible for the exter-
nal line selection.
h i
or
KKK
+
h i
or
Replace the handset;
Press one of the keys to enter the
configuration mode;
Select the display option 6 to ajust
tone/melody, pressing the key
Through the keys
possible to control the ringing volu-
me;
Lift and replace the handset, or wait
about 5 seconds to finish the ajust-
ment;
Press one of the keys to configure
volume;
Ajustment indication;
Replace the handset;
24
Basic Ajustments
h i
or
6
;
, it is