Indicator Lamps; Choke Lever; Ignition Lock - KTM 640 LC4 Owner's Manual

1
8
3
4
120°C (248°F)
110°C (230°F)
100°C (212°F)
70°C (158°F)
60°C (140°F)
50°C (122°F)
40°C (104°F)
2
Cooling liquid temperature display
1
The temperature display is shown in 7 bars. The more bars that light up,
the hotter the cooling liquid. When the lowest bar lights up, the cooling
liquid has reached a temperature of approx. 40°C (104°F). When the upper
bar lights up 120°C (248°F), all of the bars will start to blink and the red
2
warning lamp will light up.
WARNING
P
OSSIBLE CAUSES FOR AN INCREASE IN TEMPERATURE
FOR THE COOLING LIQUID TEMPERATURE TO LIGHT UP
– D
RIVING TOO SLOWLY AND DRIVING WITH A HEAVY LOAD AT HIGH AIR TEMPERATURES
– N
OT ENOUGH COOLING LIQUID IN THE SYSTEM
– T
HE VENTILATOR ON THE RADIATOR IS NOT RUNNING
– I
MPROPER USE OF THE CLUTCH WHEN DRIVING SLOWLY

Indicator lamps

The green indicator lamp will blink in the blinker rhythm when the
blinker is switched on.
NOTE:
The indicator lamp will blink slower when a blinker is broken.
The green indicator lamp will light up when the gearbox is in an
idling position.
The blue indicator lamp will light up when the high beams are
switched on.
The red warning lamp will start to blink when the cooling liquid
reaches 120°C (248°F).
This warning light has no function.
This warning light has no function.
This indicator lamp has no function.

Choke lever

3
If the choke lever is pulled backwards, a bore will be opened in the
carburetor through which the engine may draw in additional fuel. This
produces a „rich" fuel/air mixture necessary for cold start. If the choke lever
is pushed forward up to the stop, the bore will be closed again. In this
position the choke cable must have a play of approx. 4 mm.
Ignition lock with 3 switch positions
Switch positions of ignition lock
= Ignition off, (engine can't be started)
= Ignition on, (engine can be started)
= Ignition off, handlebar blocked
To switch the ignition to position
and firmly press it into the lock. Turn the handlebar all the way to
the left, then turn the ignition key to the left.
The ignition key can be withdrawn in position
,
CAUSING THE RED WARNING LIGHT
:
4
:
turn the ignition key to position
and .