Specifications
ENCLOSURE
Weatherproof Rating
IP66
Enclosure Dimensions
142 mm x 370 mm x 115 mm /
(WxDxH)
5.6" x 14.6" x 4.5"
Enclosure Window
74 mm x 63 mm /
Dimensions (WxH)
2.9" x 2.5"
HEATER & BLOWER*
Power Requirement
24V AC/ 9W
Heater Operation Level
On: 15°C ±3°C / 59°F ±5.4°F
Off: 25°C ±3°C / 77°F ±5.4°F
Blower Operation Level
On: 35°C ±3°C / 95°F ±5.4°F
Off: 25°C ±3°C / 77°F ±5.4°F
Wall Mount Bracket
Bracket Length
205 mm / 8.1"
Maximum Supported Weight 22 lbs. / 10 kg
Swivel Angle
up to 360°
Precautions:
•
Use a UL/CSA approved 24V AC power supply**
•
Use an appropriate low voltage power cable to
prevent fire or electrical shock
•
Make sure to install the camera in an area that
can support the camera weight.
•
There are no user serviceable parts inside the
enclosure. Please do not disassemble the
enclosure
•
Do not clean the lens cover with an abbrasive
cleaning material—please use a soft cloth to
clean the lens cover
•
This housing is not recommended for use with
cameras featuring IR LEDs, due to the potential of
reflection
*Heater and Blower on ACC1721HB and DAC1721HB models only.
**24V AC power supply required by ACC1721HB and DAC1721HB models
only.
NEED HELP?
ACC1721HB
For customer support call:
1-888-425-6739 option 1, 1
DAC1721, DAC1721HB
For customer support call:
1-866-344-4674
Copyright © 2009 Lorex Technology Inc.
As our products are subject to continuous
improvement, Lorex Technology Inc. reserves the
right to modify product design, specifications and
prices, without notice and without incurring any
obligation. E&OE
WEATHERPROOF
CAMERA ENCLOSURE
WITH HEATER AND
QUICK START GUIDE
MODELS:
ACC1721HB
DAC1721, DAC1721HB
*Heater and Blower on ACC1721HB and DAC1721HB models only.
BLOWER*
English Version 1.0