Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Krell Industries Manuals
  4. Amplifier
  5. KSP-7B
  6. Owner's manual

Krell Industries KSP-7B Owner's Manual

Krell industries inc. stereo preamplifier owner's manual
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
KSP-7B
STEREO
PREAMPLIFIER
OWNER'S
MANUAL

Advertisement

loading

Related Manuals for Krell Industries KSP-7B

Summary of Contents for Krell Industries KSP-7B

  • Page 1 KSP-7B STEREO PREAMPLIFIER OWNER’S MANUAL...

  • Page 2: General Information

    45 Connair Road Orange, CT 06477-0533, USA INTRODUCTION & GENERAL Thank you for purchasing the KRELL KSP-7B Preamplifier. the latest evolution of KRELL’s entry level preamplifier of its design concepts are similar are wholly unique to KRELL. Two important mono operation (all active regulators)
  • Page 3 ABOUT THE OWNERS ~ MANUAL The KSP-7B Owner’s Manual is divided into various groups of information. The purpose of he document as a whole is to familiarize and guide you through its set-up, installation progression. The Table of Contents is as follows: A.

  • Page 4: Installation

    Moving Coil Cartridges:’ The KSP-7B is shipped with the phono section gain set for moving coil cartridges changed with a set of internal switches. To access these the top cover must be removed with the supplied allen driver. At the left-rear is a two-position toggle switch.
  • Page 5 When installing th’e KSP-7B, always connect the DC cable between the preamplifier chassis and the power supply before plugging the power supply into the AC mains. d. Always disconnect the AC from the mains before disconnecting the DC cable from the preamplifier. e.
  • Page 6 This supply does not’ require that an AC circuit be dedicated for its use only. It should be connected to a 15 or 20 amp circuit that is dedicated for the source components and preamplifier. the mains with light-gauge outlet adapters. AC extension cords, outlet strips and good quality surge protectors that are rated for 15 amps and are grounded are acceptable.

  • Page 7: Operation

    i. For use with an~plifiers connect the RCA Main Outputs to the amplifier inputs. This constitutes the conventional hook-up for a single-ended unbalanced system. For use with amplifiers Outputs to the amplifier inputs. The pin assignments are as follows: 1 = ground, 2 = non-inverted output, 3 = inverted output.
  • Page 8 Note: Components that are not being listened have their volume turned down. For instance, or have its volume lowered while it is not being listened to. Use the ~ switch to choose between the output of the ~ switch or the playblack from a tape deck for monitoring.
  • Page 9 The KSP-7B has a limited warranty of five years from the date of purchase. Please return the completed warranty card immediately after successful installation and operation are completed. The warranty for KRELL products is valid in the country to which they were originally shipped and at the factory.