Remote Control - Krell Industries KRC-HR Owner's Reference Manual

REMOTE CONTROL
1. When a function button on the remote control is pressed and held, the blue
pilot LED will flash on the KRC-HR. When the button is released, the
flashing stops. This indicates that the KRC-HR has received a command.
2. The functions of the remote control are identical to the front panel functions.
BATTERY INSTALLATION
Batteries should be replaced when the KRC-HR functions from the remote
control become intermittent.
1. Remove the four hex head screws from the back of the control, with the T- 10
torx supplied.
2. Remove the back plate to expose the battery storage compartment.
3. Replace batteries (Refer to the polarity (+-) markings while inserting
batteries for proper installation).
4. Replace the back plate and insert the four hex head screws.
10