Calibrating The Tuner - Korg ToneWorks AX3000G Owner's Manual

3. Tune your guitar while watching the tuner display or the meter in the name dis-
play.
The pitch is flat
Tuner display
Name display
4. When you've finished tuning, press the EXIT/TUNE button once again or press
any desired program select switch.
HINT: If you exit the Tuner by pressing a program select switch, this will also switch
to the program you selected.
C
ALIBRATING THE TUNER
When you switch the AX3000G on, the built-in tuner is automatically calibrated to
A=440 Hz (a.k.a. "concert pitch"). If desired, you can recalibrate the tuner in the
range of A = 438 Hz–445 Hz.
• While the tuner is active, the value display shows the frequency of the reference
pitch. You can use the ▲/▼ buttons to calibrate this in the range of 438 Hz–445 Hz.
HINT: If you've recalibrated the tuner, remember that the setting will be automati-
cally reset to 440 Hz the next time you turn your AX3000G on.
The pitch is correct
Tuner display
Name display
22
The pitch is sharp
Tuner display
Name display