Konica Minolta Bizhub 222 User Manual page 28

Installing the fax driver
– If the connection to this machine cannot be detected and the list is
not displayed, select "Specify the Printer/MFP Except for the
Above. (IP Address, Host Name...)", click the [Refer to] button, and
then go to step 6.
– When the connection to the machine cannot be detected, the list is
not displayed. If the printer cannot be detected, turn the machine
off, then on again.
When turning the power off, then on again, wait at least 10 seconds
before turning the power on again; otherwise, this machine may not
function properly.
6
Select the connecting method, and then click the [OK] button.
– If connecting with Port9100, select "IP Address/IP Host Name" and
type in the IP address.
– Beside "Local Port", select "USB" for a USB connection, or select
"LPT1" for a parallel connection.
Fax Driver
2
2-8