Installing the fax driver
!
Detail
Before using this machine in a network environment, the network settings
must be specified for this machine. For details, refer to the User's Guide
[Print Operations].
To install the printer driver under Windows Vista/Server 2008, log on as
the Administrator.
This manual describes the setup method using the Add Printer Wizard
only for the LPR/Port9100 printing and parallel connection. For installa-
tion procedures via other network connections, refer to the User's Guide
[Print Operations].
This manual describes the setup method of USB connection using the
Plug and Play.
2.1.3
Windows NT 4.0
Setup method
Connection method
that can be set up
with an installer
Connection method
that can be set up
with the Add Printer
Wizard
!
Detail
Before using this machine in a network environment, the network settings
must be specified for this machine. For details, refer to the User's Guide
[Print Operations].
Before performing the installation in Windows NT 4.0 for this machine to
be connected directly to the network using the TCP/IP protocol, the Mi-
crosoft TCP/IP Print Service must be installed on the computer.
To install the printer driver under Windows NT 4.0, log on as the Admin-
istrator.
Fax Driver
Connection method
Network con-
LPR
nection
Parallel connection
Network con-
LPR
nection
Parallel connection
Refer to
"Automatic installation using the installer"
on page 2-5
* Select the connection method in the
course of installation.
Select "Normal Printing" for a parallel
(LPR) connection.
"Installing the fax driver using the Add
Printer Wizard" on page 2-11
"For Windows 2000/NT 4.0" on
page 2-19
2
2-4