Konica Minolta bizhub C450 Fax Manual page 336

12
Item
No.:
Destination:
Start Time:
Time:
Prints:
Result:
12-10
Description
Serial numbers are assigned to each transmission and reception.
The following is shown.
• Name when name is registered in abbreviated dialing or entry list
• Telephone number or mail address of destination
The time at which communication started is shown.
The following is indicated.
In fax mode: Time required for transmission
The number of pages transmitted is shown. In the case of memory trans-
mission, the number of pages able to be transmitted and the total
number of pages are shown in the form of a fraction.
OK Shown when communication ended normally.
S-OK Shown when communication was stopped.
PW-OFF Shown when the power switch is turned off.
TEL Shown when there has been an incoming tele-
phone call.
NG Shown when a communication error has oc-
curred.
Cont Shown when an error has occurred and the FK-
502 has switched to error page redialing.
No Ans Shown when the destination being called did not
answer.
Busy Shown when unable to complete communication
due to the line being busy.
M-Full Memory-full is shown when the fax file memory
became full during reception and reception
failed.
Explanation of reports and lists
C450