Initial Setting - Konica Minolta bizhub C450 Fax Manual

Fax operations
Hide thumbs Also See for bizhub C450:
Table of Contents

Advertisement

Utility mode
11.4

Initial setting

Set the default of the fax function.
It is possible to set a fax function that is selected when the main power is
turned on or when [Reset] is pressed.
For this setting, display the fax screen and press the [Utility/Counter] on this
screen.
Item
Fax
* Indicates factory default setting.
Initial setting
1
Open the user setting screen (See "Entering user setting" on
page 11-3).
2
Press [Initial Setting].
Some items may not be displayed depending on the optional set-
tings.
In the utility mode, it is also possible to enter a number displayed in
the key through the keypad for selection. In the case of [Initial Set-
ting], enter 3 through the numeric keypad.
C450
Description
[Current Setting]:
Before entering the utility mode, each of the
items that have been set on the touch panel is
registered as the default of fax function.
[Factory Default]:
Values set when shipped from the factory are
registered as the default of fax function.
11
Available value
*
Current Setting
/ Factory
Default
11-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents