Report Settings; Job Settings List - Konica Minolta bizhub C450 Fax Manual

Utility mode

11.2.13 Report Settings

Administrator Setting >> Fax Setting >> Report Settings
Sets the method to print a report. (page 11-66)
Item
Activity Report
TX Report
Sequential TX
Report
Timer Reserva-
tion TX Report
Confidential RX
Report
Bulletin TX Re-
port
Broadcast Re-
sult Report
Paper Tray for
*1
Reports
TX Result Report
Check
*1
:
Tray type may be different depending on the installed option.
* :
Indicates factory default setting.

11.2.14Job Settings List

Administrator Setting >> Fax Setting >> Job Settings List
!
Detail
For details, see page 12-44
C450
Description
Determines whether to print the report and the
timing at which the report will be printed out.
Determines how to print the synchronous re-
sult report. If you select "All Dest.", all of the re-
ports will be printed out after all transmissions
are completed. If "1 Dest. at a time" is select-
ed, the report will be printed out after each
transmission.
Specifies the paper tray used to print out a re-
port.
Determines whether to display the transmis-
sion result report select screen. If you select
"ON", it will be displayed after each transmis-
sion.
11
Available value
*
OFF / Daily / Every 100
Comm. / 100/Daily
*
ON / If TX Fails / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
All Dest. / 1 Dest. at a time
*
Tray 1 / Tray 2 / Tray 3 /
Tray4 / Bypass Tray
*
OFF / ON
11-13