Konica Minolta bizhub C450 Fax Manual page 181

Transmission applications
4
Press [ECM OFF].
– To release the setting, press [Cancel] or press [ECM OFF] again.
5
Press [OK].
The comm. setting screen will be restored.
6
Press [OK].
The fax screen will be restored.
7
Set other functions if necessary.
– See "Setting transmission conditions" on page 3-11 for information
about setting functions in the fax screen. See "Application func-
tions overview" on page 7-5 for information about setting functions
in the fax application menu.
8
Designate the destination.
– See "Selecting one destination" on page 3-21 for designating the
destination.
9
Set the original document.
– See "Placing originals on the platen glass" on page 3-8 for informa-
tion about setting the document.
10
Press [Start].
The FK-502 starts transmission.
C450
7
7-39