Aquapro Fish Feeders ADF-150DX Product Information Manual page 8

14
With the hopper lying on its side, take one
full extension leg section and slide it into
the square stub leg that you have already installed
on the hopper (Illustration J).
15
Repeat step #14 for the remaining two
extension leg sections.
16
Once all extension leg sections are installed
into the stub legs, locate a second person
to help raise the unit. One person must hold
onto one of the extension leg sections while the
other person raises the unit, using the other two
extension leg sections for leverage. Be careful while
(Illustration J)
PAge 8
you are lifting this unit into place as not to allow the
extension leg kit sections to come undone.
17
Once complete, refer to directional
product information guide for installation
instructions.
Once again, thank you for your purchase!