Sony Handycam CCD-TRV107 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. Hi8 Handycam Vision CCD-TRV107
  6. Service manual

Sony Handycam CCD-TRV107 Service Manual

Hi8 video camera recorder
Hide thumbs Also See for Handycam CCD-TRV107:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
Ver 1.1 2002. 03
Video camera
recorder
System
Video recording system
2 rotary heads
Helical scanning
FM system
Audio recording system
Rotary heads, FM system
Video signal
NTSC color, EIA standards
Usable cassette
8mm video format cassette
Hi8 or standard 8
Recording/playback time (using
120 min. Standard 8/Hi8 video
cassette)
SP mode: 2 hours
LP mode: 4 hours
Fastforward/rewind time (using
120 min. Standard 8/Hi8 video
cassette)
Approx. 5 min.
Viewfinder
Electric Viewfinder (monochrome)
Image device
CCD-TRV107/TRV108:
3.0 mm (1 / 6 type) CCD
(Charge Coupled Device)
Approx. 270 000 pixels
(Effective: Approx. 250 000 pixels)
CCD-TRV308/TRV408/TRV608:
4.5mm (1/4 type) CCD
(Charge Coupled Device)
Approx. 320 000 pixels
(Effective: Approx. 200 000 pixels)
CCD-TRV107/TRV108/TRV308/
Photo : CCD-TRV108
SPECIFICATIONS
Lens
Combined power zoom lens
Filter diameter 37 mm (1 7/16 in.)
CCD-TRV107:
×
×
20
(Optical), 450
(Digital)
CCD-TRV108/TRV308:
×
×
20
(Optical), 460
(Digital)
CCD-TRV408/TRV608:
×
×
20
(Optical), 560
(Digital)
Focal length
3.6 - 72 mm (5/32 - 2 7/8 in.)
When converted to a 35 mm still
camera
CCD-TRV107/TRV108:
51.8 - 1 036 mm (2 - 40 6 / 8 in.)
CCD- TRV308/TRV408/TRV608:
41 - 820 mm (1 5 / 8 - 32 3 / 8 in.)
Color temperature
Auto
Minimum illumination
CCD-TRV107/TRV108:
1 lx (lux) (F 1.4)
CCD-TRV308/TRV408/TRV608:
0.4 lx (lux) (F 1.4)
0 lx (lux) (in the NightShot mode)*
* Objects unable to be seen due to
the dark can be shot with
infrared lighting.
Input/output connectors
S video output
4-pin mini DIN
Luminance signal: 1 Vp-p,
75 Ω (ohms), unbalanced
Chrominance signal: 0.286 Vp-p,
75 Ω (ohms), unbalanced
TRV408/TRV608
Hong Kong Model
For MECHANISM ADJUSTMENT, refer to the "8mm
Video MECHANICAL ADJUSTMENT MANUAL
M2000 MECHANISM " (9-929-861-11).
Audio/Video output
AV MINIJACK, 1 Vp-p, 75 Ω
(ohms), unbalanced, sync negative
327 mV, (at output impedance
more than 47 kΩ (kilohms))
Output impedance with less than
2.2 kΩ (kilohms)/Monaural
minijack
(ø 3.5 mm)
RFU DC OUT
Mini-mini jack (ø 2.5 mm)
DC 5V
USB jack (CCD-TRV608 only)
mini-B
LCD screen
Picture
CCD-TRV107/TRV108/TRV308/
TRV408:
6.2 cm (2.5 type)
×
×
50.3
37.4 mm (2
1 1/2 in.)
CCD-TRV608:
7.5 cm (3 type)
×
×
61.0
43.8 mm (2 1/2
1 3/4 in.)
Total dot number
CCD-TRV107/TRV108/TRV308/
TRV408:
×
61 600 (280
220)
CCD-TRV608:
×
123 200 (560
220)
VIDEO CAMERA RECORDER
RMT-708
US Model
Canadian Model
CCD-TRV108/TRV308/TRV608
E Model
CCD-TRV107/TRV108/TRV308/
TRV408/TRV608
Korea Model
CCD-TRV408
Tourist Model
CCD-TRV107/TRV408
Argentina Model
CCD-TRV108/TRV608
Brazilian Model
CCD-TRV108
M2100 MECHANISM
IX
General
Power requirements
7.2 V (battery pack)
8.4 V (AC power adaptor)
Average power consumption
(when using the battery pack)
During camera recording using
LCD
CCD-TRV107/TRV108/TRV308/
TRV408: 2.6 W
CCD-TRV608: 3.1 W
Viewfinder
1.9 W
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Recommended charging
temperature
10 °C to 30 °C (50 °F to 86 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (Approx.)
×
×
90
102
197 mm
×
×
(3 5/8
4 1/8
7 7/8 in.)
(w/h/d)
— Continued on next page —

Advertisement

Table of Contents
loading

Related Manuals for Sony Handycam CCD-TRV107

Summary of Contents for Sony Handycam CCD-TRV107

  • Page 1 CCD-TRV107/TRV108/TRV308/ TRV408/TRV608 RMT-708 SERVICE MANUAL US Model Canadian Model CCD-TRV108/TRV308/TRV608 E Model CCD-TRV107/TRV108/TRV308/ TRV408/TRV608 Ver 1.1 2002. 03 Korea Model CCD-TRV408 Hong Kong Model Tourist Model CCD-TRV107/TRV408 Argentina Model CCD-TRV108/TRV608 Brazilian Model Photo : CCD-TRV108 CCD-TRV108 M2100 MECHANISM For MECHANISM ADJUSTMENT, refer to the “8mm Video MECHANICAL ADJUSTMENT MANUAL M2000 MECHANISM ”...
  • Page 2 MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
  • Page 3 (1), Power cord (1) 9 CD-ROM (SPVD-008 (I) USB Driver) (CCD-TRV608 only) (1) 3 NP-FM30 battery pack (1) 0 2-pin adaptor CCD-TRV107: JE/TRV408: JE only 4 Size AA (R6) battery for Remote Commander (CCD-TRV107/TRV408 only) (2) qa 2-pin adaptor...

  • Page 4: Table Of Contents

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 TABLE OF CONTENTS SERVICE NOTE DISASSEMBLY POWER SUPPLY DURING REPAIRS ····························· 7 2-1. VIDEO LIGHT (VIDEO LIGHT MODEL) ··················· 2-2 TO TAKE OUT A CASSETTE WHEN NOT EJECT 2-2. LCD SECTION (PD-156 BOARD) ································ 2-3 (FORCE EJECT) ································································ 7 2-3.
  • Page 5 1-4. ELECTRONIC VIEWFINDER SYSTEM • VC-272 (CAMERA PROCESSOR AMP, Y/C ADJUSTMENT PROCESSOR, FOCUS/ZOOM MOTOR DRIVE, (CCD-TRV107/TRV308/TRV408/TRV608) ················· 5-21 REC/PB AMP, LINE OUT AMP, SERVO, MODE RGB AMP Adjustment (VF-150 board) ························ 5-22 CONTROL, STEADY SHOT, HI CONTROL, AUDIO, 1-1. Automatic Adjustment ··················································· 5-22 DC-DC CONVERTER, CONNECTOR, USB SIGNAL) 1-2.
  • Page 6 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Switch check (2) ···························································· 5-45 Switch check (3) ···························································· 5-46 Record of Use check ······················································ 5-46 Record of Self-diagnosis check ····································· 5-47 REPAIR PARTS LIST 6-1. EXPLODED VIEWS ······················································ 6-1 6-1-1. OVERALL SECTION ····················································· 6-1 6-1-2. F PANEL SECTION ······················································· 6-2 6-1-3.

  • Page 7: Service Note

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 SERVICE NOTE POWER SUPPLY DURING REPAIRS In this unit, about 10 seconds after power is supplied (8.4V) to the battery terminal, the power is shut off so that the unit cannot operate. The following method is available to prevent this.

  • Page 8: Self-Diagnosis Function

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 SELF-DIAGNOSIS FUNCTION Self-diagnosis Display Self-diagnosis Function When problems occur while the unit is operating, the counter of the When problems occur while the unit is operating, the self-diagnosis viewfinder or LCD or Display window shows a 4-digit display function starts working, and displays on the viewfinder or LCD or consisting of an alphabet and numbers, which blinks at 3.2 Hz.

  • Page 9: Self-Diagnosis Code Table

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Self-diagnosis Code Table Self-diagnosis Code Block Detailed Symptom/State Correction Function Code Non-standard battery is used. Use the InfoLITHIUM battery. Condensation. Remove the cassette, and insert it again after one hour. Video head is dirty. Clean with the optional cleaning cassette.
  • Page 10 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Self-diagnosis Code Block Detailed Symptom/State Correction Function Code Inspect the lens block focus reset sensor (Pin qs of CN301 of VC- Difficult to adjust focus 272 board) when focusing is performed when the control dial is (Cannot initialize focus.) rotated in the focus manual mode and the focus motor drive circuit (IC301 of VC-272 board) when the focusing is not performed.

  • Page 11: General

    •ORC [MENU] (p. 70) Function to use after recording •Easy Dubbing (p. 51) Function to make transition smooth •END SEARCH (P.28) CCD-TRV608 only CCD-TRV107/TRV308/TRV408/TRV608 only Quick Start Guide Recording a picture (p. 19) Remove the lens cap. Set the POWER...

  • Page 12: Getting Started

    3 NP-FM30 battery pack (1) (p. 11, 12) 8 USB Cable (CCD-TRV608 only) (1) (p. 59) 4 Size AA (R6) battery for Remote Commander (CCD-TRV107/TRV408 9 CD-ROM (SPVD-008 USB Driver) only) (2) (p. 96) (CCD-TRV608 only) (1) (p. 60) Contents of the recording cannot be compensated if recording or playback is not...

  • Page 13: Charging The Battery Pack

    Using a car battery Approximate continuous playing time at 25°C (77°F). The battery life will be shorter if Use Sony DC Adaptor/Charger (optional). Refer to the operating instructions of the DC you use your camcorder in a cold environment. Adaptor /Charger for further information.

  • Page 14: Step 2 Setting The Date And Time

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Step 2 Setting the date and time Step 2 Setting the date and time Set the date and time settings when you use your camcorder for the first time. To check the preset date and time “CLOCK SET” will be displayed each time when you set the power switch to CAMERA Press DATE to display the date indicator.
  • Page 15 When you use the LCD screen outdoors in direct sunlight The LCD screen may be difficult to see. If this happens, we recommend that you record After using your camcorder (CCD-TRV107/TRV308/TRV408/TRV608 only) with the viewfinder. Remove the battery pack from your camcorder to avoid turning on the built-in light accidentally.

  • Page 16: Shooting Backlit Subjects - Back Light

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Recording a picture Recording a picture Indicators displayed in the recording mode Shooting backlit subjects – BACK LIGHT The indicators are not recorded on tape. When you shoot a subject with the light source behind the subject or a subject with a light background, use the backlight function.

  • Page 17: Checking The Recording - End Search

    To monitor the high-speed picture while advancing or rewinding the tape (skip scan) Press DISPLAY on your camcorder or the Remote Commander (CCD-TRV107/TRV408 Keep pressing m while rewinding or M while advancing the tape. To resume only) supplied with your camcorder.

  • Page 18: Viewing The Recording On Tv

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 — Advanced Recording Operations — Viewing the recording on TV Using the wide mode Connect your camcorder to your TV with the A/V connecting cable supplied with your You can record a cinema-like picture (CINEMA) or a 16:9 wide picture to watch on the camcorder to watch the playback picture on the TV screen.

  • Page 19: Using Special Effects - Picture Effect

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Using special effects – Picture effect Using the fader function You can digitally process images to obtain special effects like those in films or on the (1) When fading in [a] In the standby mode, press FADER until the desired fader indicator flashes.

  • Page 20: Adjusting The Exposure Manually

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Adjusting the exposure manually Focusing manually You can manually adjust and set the exposure. You can gain better results by manually adjusting the focus in the following cases: Adjust the exposure manually in the following cases: •The autofocus mode is not effective when shooting: –...

  • Page 21: Making Your Own Titles

    Built-in light Replacing the bulb Use the Sony XB-3D halogen lamp (optional). The supplied halogen lamp is not commercially available. Purchase the Sony XB-3D halogen lamp. Remove the power source before replacing the bulb. To turn off the built-in light (1) Remove the built-in light unit while pushing the hole under the built-in light Press LIGHT repeatedly, until no indicator appears on the screen.

  • Page 22: Editing

    Connect your camcorder to the VCR using the A/V connecting cable supplied with your camcorder. •When replacing the bulb, use only the Sony XB-3D halogen lamp (optional) to reduce You can record and edit a picture with the connected VCR by using your camcorder as the risk of fire.
  • Page 23 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Dubbing a tape easily – Easy Dubbing Dubbing a tape easily – Easy Dubbing (2) Setting the IR SETUP code Step 2: Setting the VCR to operate with your camcorder 1 Turn the SEL/PUSH EXEC dial to select IR SETUP, then press the dial.

  • Page 24: Pc Connection (Ccd-Trv608 Only)

    To stop dubbing during editing •Installing “PIXELA ImageMixer Ver.1.0 for Sony” (p. 63). Press x on your camcorder. •Capturing images with “PIXELA ImageMixer Ver.1.0 for Sony” (p. 63 to 66). To quit the Easy Dubbing function Recommended computer environment Your camcorder stops when dubbing is complete. Then the display returns to START in the menu settings.

  • Page 25: Viewing Images Using Your Computer - Usb Streaming

    Install “PIXELA ImageMixer Ver.1.0 for Sony” to your computer. “PIXELA Windows 2000 Professional: ImageMixer Ver.1.0 for Sony” is contained on the CD-ROM supplied with your Select “My Computer” t “Control Panel” t “System” t “Hardware” tab, camcorder. You can view video images easily on your camcorder, using your computer and click the “Device Manager”...

  • Page 26: Customizing Your Camcorder

    R E T URN If you have any questions about “PIXELA ImageMixer Ver1.0 for Sony” ImageMixer Ver.1.0 for Sony is a trademark of PIXELA corporation. Refer to the O T H E R S information web site at: “http://www.imagemixer. com”.
  • Page 27 ON To make the demonstration appear. CAMERA •When you record in the LP mode, we recommend using a Sony video cassette so that you can get the most out of your camcorder. To cancel the demonstration mode. •When you record in both the SP and LP modes on one tape, or you record some scenes in the LP mode, the playback image may be distorted.

  • Page 28: Troubleshooting

    If the problem persists, disconnect the power source and Icon/item Mode Meaning switch contact your Sony dealer or local authorized Sony service facility. If “C:ss:ss” WORLD TIME —— To set the clock to the local time. CAMERA appears on the screen, the self-diagnosis display function has worked.

  • Page 29: Self-Diagnosis Display

    Slow flashing: • CLEANING CASSETTE* The video heads are dirty. (p. 85) – You need to clean the heads using the Sony V8-25CLD cleaning cassette (optional). (p. 85) •START/STOP KEY Press START/STOP to activate the ORC setting. This message is displayed in white. (p. 70) The battery pack is dead or Self-diagnosis display (p.

  • Page 30: Additional Information

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 — Additional Information — About the “InfoLITHIUM” battery pack About video cassettes What is the “InfoLITHIUM” battery pack? Selecting the cassette type The “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camcorder...

  • Page 31: Maintenance Information And Precautions

    When the playback pictures still contain noise even if you have cleaned the video heads with a cleaning cassette, the video heads may have worn down due to long use. If this is the case, they must be replaced with new heads. Contact your Sony dealer or local authorized Sony service facility.

  • Page 32: Quick Reference

    •If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer. Identifying the parts and controls Identifying the parts and controls qs Video control buttons (p.
  • Page 33 Built-in light indicator* (p. 46) (p. 77) 1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid remote control unintentional operations. If you use another Sony VCR in the qf STBY/REC indicator (p. 19)/...

  • Page 34: Disassembly

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 SECTION 2 DISASSEMBLY The following flow chart shows the disassembly procedure. 2-1. Video light (Video light model) PD-156 board service position 2-2. LCD section (PD-156 board) 2-3. VF-150, LB-073 boards (TRV107/TRV308/TRV408/TRV608) VF-150, LB-073 boards service position 2-4. Liquid crystal indicator module (TRV108) SI-033 board service position 2-5.

  • Page 35: Video Light (Video Light Model)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 [CONNECTION OF EQUIPMENT] CPC connector CN713 Conductor side CPC lid MI screw (M2 × 4) (H) AC power AC IN Claw adaptor Info lithium battery (L series) Adjustment remote commander (RM-95) CPC-jig for SB (J-6082-539-A) NOTE: Follow the disassembly procedure in the numerical order given.

  • Page 36: Lcd Section (Pd-156 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-2. LCD SECTION (PD-156 BOARD) 3 Two claws 5 Two tapping screws (B2 × 7) 4 P cabinet C (21) 9 Two 2 Two MI screws claws (M2 × 4) (H) q; Indication LCD block assembly (20P), LCD holder...

  • Page 37: Boards (Trv107/Trv308/Trv408/Trv608)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-3. VF-150, LB-073 BOARDS (TRV107/TRV308/TRV408/TRV608) 1 Raise the EVF in the A direction and slide it in the B direction. Two tapping screws (B2 × 5) 7 VF lens (B) assembly 5 EVF cabinet upper 6 Two claws 8 Caution...

  • Page 38: Liquid Crystal Indicator Module (Trv108)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-4. LIQUID CRYSTAL INDICATOR MODULE (TRV108) 1 Raise the EVF in the A direction and slide it in the B direction. Two tapping screws (B2 × 5) 5 EVF cabinet upper 4 Claw 6 FP-402 flexible board (14P) 3 EVF cabinet rear assembly...

  • Page 39: Front Panel Section (Si-033 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-5. FRONT PANEL SECTION (SI-033 BOARD) 1 Open the jack cover 3 MI screw (M2 × 4) (H) 2 Two MI screws (M2 × 4) (H) 4 Two MI screws (M2 × 4) (H) 5 Two claws Remove it while taking care as the FP-418 flexible cable is connected.

  • Page 40: Cabinet (L) Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-6. CABINET (L) SECTION 2 Two MI screws (M2 × 4) (H) 4 Cassette lid assembly 3 Two claws 5 Two MI screws (M2 × 4) (H) 8 Cabinet (L) section 6 MI screw (M2 × 4) (H) 7 Two MI screws (M2 ×...

  • Page 41: Cabinet (R) Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-7. CABINET (R) SECTION 1 MI screw (M2 × 4) (H) 2 MI screw (M2 × 4) (H) 6 Cabinet (R) section 4 Control switch block (CF-2000) (22P) 3 Three MI screws 5 Harness (PD-115) (M2 × 4) (H) (20P) 2-8.

  • Page 42: Battery Panel Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-9. BATTERY PANEL SECTION 7 Screw 1 FP-399 flexible board (6P) (TRV608) 2 Battery terminal board (6P) 5 Control switch block (SS-2000) (5P) 4 Claw 6 Battery panel section REMOVING THE BATTERY TERMINAL BOARD 3 MI screw AND CONTROL SWITCH BLOCK (SS-2000) (M2 ×...

  • Page 43: Board

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-11.VC-272 BOARD 7 Control switch block (FK-2000) (12P) 5 Screw (M2 × 3), lock ace, p2 4 FP-397 flexible board 8 VC-272 board 3 Two screws (M2 × 3), lock ace, p2 6 Claw 1 Two screws 2 MD frame (B) (M2 ×...

  • Page 44: Mechanism Deck

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 [SERVICE POSITION TO CHECK THE VTR SECTION] Connection to Check the VTR Section To check the VTR section, set the VTR to the “Forced VTR power ON” mode. Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position).
  • Page 45 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 [SERVICE POSITION TO CHECK THE CAMERA SECTION] Connection to Check the Camera Section To check the camera section, set the camera to the “Forced camera power ON” mode. Setting the “Forced Camera Power ON” mode Exiting the “Forced Camera Power ON” mode 1) Select page: 0, address: 01, and set data: 01.

  • Page 46: Hinge Assembly

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-13.MECHANISM DECK 3 Control switch block 1 Screw (FK-2000) (M2 × 3), lock ace, p2 2 Claw 6 Mechanism deck 4 Three screws (M1.7 × 2.5) 5 MD frame (A) 2-14.HINGE ASSEMBLY (Remove the LCD unit reffering to section 2-2 before starting disassembly.)

  • Page 47: Circuit Boards Location

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-15.CIRCUIT BOARDS LOCATION LB-073 (TRV107/TRV308/TRV408/TRV608) (BACK LIGHT) VF-150 (TRV107/TRV308/TRV408/TRV608) (RGB DRIVE/TG) CD-354 (CCD IMAGER) SI-033 PD-156 (STEADY SHOT, MIC) RGB DRIVE, TIMING GENERATOR, LCD DRIVE, BACK LIGHT DRIVE LIQUID CRYSTAL INDICATOR MODULE (TRV108) (B/W EVF BLOCK) VC-272 (CAMERA, VIDEO, AUDIO, SERVO, HI/MODE CONTROL, D-D CONVERTER)

  • Page 48: Flexible Boards Location

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-16.FLEXIBLE BOARDS LOCATION The flexible boards contained in the mechanism deck are not shown. CONTROL SWITCH BLOCK CONTROL SWITCH BLOCK (SS-2000) (FK-2000) FP-399 (TRV608) FP-400 FP-394 FP-418 CONTROL SWITCH BLOCK (PR-10000) FP-401 (TRV107/TRV308/TRV408/TRV608) FP-402 (TRV108) FP-397 CONTROL SWITCH BLOCK...

  • Page 49: Block Diagrams

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 SECTION 3 BLOCK DIAGRAMS...

  • Page 50: Overall Block Diagram (1/2)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-1. OVERALL BLOCK DIAGRAM (1/2) ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. (CCD-TRV608) FP-399 ZOOM IRIS CD-354 BOARD VC-272 BOARD LENS METER (FLEXIBLE) Y0-Y7 IC801 (PAGE4-58) HALL IC2191...

  • Page 51: Overall Block Diagram (2/2)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-2. OVERALL BLOCK DIAGRAM (2/2) ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. (CCD–TRV107/TRV308/TRV408/TRV608) FP-397 (FLEXIBLE)(2/2) VC-272 BOARD PD-156 BOARD (2/3) (PAGE 4-55) VIDEO VIDEO V LIGHT PWM LIGHT...

  • Page 52: Camera/Video Block Diagram (1/2)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-3. CAMERA/VIDEO BLOCK DIAGRAM (1/2) ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. VC-272 BOARD IC272 ef PB C RF PB C RF IC2191 2 CD-354 IC272 BOARD (4-35) IC2191 7 0.5Vp-p...

  • Page 53: Camera/Video Block Diagram (2/2)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-4. CAMERA/VIDEO BLOCK DIAGRAM (2/2) ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. VC-272 BOARD PB C RF IC101 wj,ef (4-42) (4-38) IC151 7 IC101 REC/PB IC151 REC/PB AMP...

  • Page 54: Usb Block Diagram

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-5. USB BLOCK DIAGRAM ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. (4-57) D3.3V VC-272 BOARD (CCD-TRV608) IC801 USB DER MODE FP-399 CONTROL Q801 USB D+ PULL UP (FLEXIBLE)

  • Page 55: Vtr/Camera Control Block Diagram

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-6. VTR/CAMERA CONTROL BLOCK DIAGRAM ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. VC-272 BOARD IC402 1 M2100 MECHA DECK REC/PB (CCD-TRV308//TRV408/TRV608) (PAGE 4-30) (4-46) IC451 SI-033 BOARD (4-48) 2.3Vp-p...

  • Page 56: Servo Block Diagram

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-7. SERVO BLOCK DIAGRAM ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. IC451 wk IC001 tk M2100 MECHA DECK REC/PB VC-272 BOARD REC/PB IC451 tj,tl,ya (PAGE 4-30) REC/PB (4-46)

  • Page 57: Mode Control Block Diagram

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-8. MODE CONTROL BLOCK DIAGRAM ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. VC-272 BOARD CONTROL SWITCH BLOCK LI 3V BT001 (CF-2000) (PAGE 4-27) LITHIUM BATTERY IC503 (4-49) S007...

  • Page 58: Audio Block Diagram

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-9. AUDIO BLOCK DIAGRAM ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. VC-272 BOARD (4-51) IC351 AFM PROCESS CN713 BPF MONI (4-51) PB RF (FOR CHECK) IC251 MIC(L) A FADE (IC601 PB 1.5M...
  • Page 59 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-10.LCD BLOCK DIAGRAM ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. IC5501 rk PD-156 BOARD IC5501 w; PANEL ID XHD OUT IC5501 ws C SYNC CN5502 450mVp-p IC5501 rj PANEL 2.8V...

  • Page 60: Evf Block Diagram

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-11.EVF BLOCK DIAGRAM ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. (CCD-TRV107/TRV308/TRV408/TRV608) IC2001 w; IC2001 rk VF-150 BOARD 0.4Vp-p 7.5Vp-p IC2001 ws VCC1 EVF 2.8V VCC2 EVF 13.3V (4-13)
  • Page 61 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-12.POWER BLOCK DIAGRAM (1/2) ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. VC-272 BOARD BATT SIG BT901 BATT/EXT SW BATTERY CN001 TERMINAL BATT UNREG F001 Q003,004 CHARGE INIT CHARGE ON...
  • Page 62 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-13.POWER BLOCK DIAGRAM (2/2) ( ) : Page No. shown in ( ) indicates the page to refer on the schematic diagram. VC-272 BOARD CONTROL SWITCH S001 CN711 XCAM+STBY SW POWER BLOCK(SS-2000) XVTR MODE SW CAMERA (PAGE 4-50) OFF (CHG)

  • Page 63: Printed Wiring Boards And Schematic Diagrams

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM (1/2) CD-354 BOARD CONTROL SWITCH BLOCK(FK-2000) (EXCEPT : CCD-TRV108) LENS UNIT S001,005~009,013 S002 IMAGER RV001 VIDEO LIGHT ZOOM EJECT/ STOP/ PAUSE/ REW/ PLAY/RESET FP-400 FLEXIBLE TO FH(2/2)

  • Page 64: Frame Schematic Diagram (1/2)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 FRAME SCHEMATIC DIAGRAM (2/2) ND901 BACK LIGHT LCD901 2.5INCH (CCD-TRV107/TRV108/TRV308/TRV408) 3INCH (CCD-TRV608) CN5703 COM1 COM2 SEG3 SEG4 SEG5 SEG6 SEG2 LCD902 SEG7 CHARACTER DISPLAY CN5502 SEG8 CONTROL SWITCH BLOCK(CF-2000) SEG9 XVD_OUT SEG10 PD-156 BOARD SEG1 S001 (OPEN/CLOSE) PANEL_COM SEG11...

  • Page 65: Printed Wiring Boards And

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR WIRING BOARDS AND SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) (Measuring conditions voltage and waveform) • b: Pattern from the side which enables seeing.

  • Page 66: Ccd Imager

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 CD-354 (CCD IMAGER) PRINTED WIRING BOARD For Schematic Diagram • : Uses unleaded solder. • Refer to page 4-60 for waveforms. CD-354 BOARD NO MARK:REC/PB MODE CCD IMAGER R :REC MODE P :PB MODE XX MARK:NO MOUNT CN2191 CAM_15V/12V...

  • Page 67: Back Light(Evf)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 LB-073 (BACK LIGHT (EVF)) PRINTED WIRING BOARD • : Uses unleaded solder. LB-073 BOARD (CCD-TRV107/TRV308/TRV408/TRV608) BACK LIGHT(EVF) XX MARK:NO MOUNT Q7701 R7701 NO MARK:REC/PB MODE UP04312008 3.3k D7702 LED DRIVE R7705 NSCW100-T39 R7704 (BACKLIGHT UNIT) 3300 IC7701 D7701 TLSU1008...
  • Page 68 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VF-150 (RGB DRIVE/TG) PRINTED WIRING BOARD • : Uses unleaded solder. For printed wiring board • Refer to page 4-63 for parts location. • This board consists of multiple layers. However, only the sides (layers) A and B are shown.
  • Page 69 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-11 for printed wiring board. • Refer to page 4-60 for waveforms. VF-150 BOARD (CCD-TRV107/TRV308/TRV408/TRV608) RGB DRIVER/TG XX MARK:NO MOUNT NO MARK:REC/PB MODE FB2002 CN2001 C2011 C2013 3.3u 0.01u EVF_B R2004 EVF_R...
  • Page 70 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 SI-033 (STEADY SHOT, MIC) PRINTED WIRING BOARD SE750 (PITCH SENSOR) For printed wiring board • Refer to page 4-63 for parts location. • This board consists of multiple layers. However, only the sides (layers) A and B are shown.

  • Page 71: Steady Shot Mic

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-15 for printed wiring board. FB754 SI-033 BOARD Note:Resistor is mounted to the location CL752 where FB755 is printed STEADY SHOT MIC XX MARK:NO MOUNT C752 NO MARK:REC/PB MODE D751 SEIDEN MA111-(K8).S0...

  • Page 72: Rgb Drive, Timing Generator, Lcd Drive, Backlight Drive) Printed Wiring Board

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 PD-156 (RGB DRIVE, TIMING GENERATOR, LCD DRIVE, BACKLIGHT DRIVE) PRINTED WIRING BOARD • : Uses unleaded solder. For printed wiring board • Refer to page 4-63 for parts location. • This board consists of multiple layers. However, only the sides (layers) A and B are shown.
  • Page 73 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 • : Uses unleaded solder. RGB DRIVE, TIMING GENERATOR, LCD DRIVE, BACKLIGHT DRIVE 4-21 PD-156...

  • Page 74: Rgb Drive, Timing Generator

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-19 for printed wiring board. • Refer to page 4-61 for waveforms. PD-156 BOARD(1/2) RGB DRIVE,TIMING GENERATOR(TG BLOCK) XX MARK:NO MOUNT FB5502 NO MARK:REC/PB MODE FB5503 C5527 L5502 C5514 0.01u 22uH 6.3V...
  • Page 75 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-19 for printed wiring board. PD-156 BOARD(2/2) FP-394 LCD DRIVE,BACKLIGHT DRIVE(BL BLOCK) FLEXIBLE XX MARK:NO MOUNT CN5703 COM1 COM1 NO MARK:REC/PB MODE COM2 COM2 SEG3 SEG3 SEG4 SEG4 SEG5 SEG5 SEG6 R5704...
  • Page 76 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 CONTROL SWITCH BLOCK(CF-2000) SWITCH XX MARK:NO MOUNT CN002 S007 REG_GND SEL/PUSH EXEC XHI_RESET SP+(BEEP) KEY_AD4 BT001 D_2.8V (LITHIUM BATTERY) LI_3V KEY_AD3 KEY_AD0 KEY_AD2 R002 REG_GND D_2.8V XHI_RESET KEY_AD1 KEY_AD4 OPEN/CLOSE SW D_2.8V REG_GND KEY_AD3 DIAL_B CH GND KEY_AD2 DIAL_A...
  • Page 77 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 LS-057 (S/T REEL SENSOR), FP-228 (DEW SENSOR), FP-299 (MODE SWITCH), FP-300 (TAPE TOP), FP-302 (TAPE END), FP-301 (TAPE LED) FLEXIBLE BOARDS FP-302 FP-300 FLEXIBLE (COMPONENT SIDE) LS-057 BOARD FP-300 FLEXIBLE FLEXIBLE Q002 Q001 TAPE END TAPE TOP SENSOR SENSOR...
  • Page 78 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 (CAMERA PROCESSOR AMP, Y/C PROCESSOR, FOCUS/ZOOM MOTOR DRIVE, REC/PB AMP, LINE OUT AMP, SERVO, MODE CONTROL, • : Uses unleaded solder. STEADY SHOT, HI CONTROL, AUDIO, DC-DC CONVERTER, CONNECTOR, USB SIGNAL) PRINTED WIRING BOARD CAMERA, VIDEO, SERVO, MODE/HI CONTROL, AUDIO, D-D CONV., USB...

  • Page 79: Printed Wiring Board

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 • : Uses unleaded solder. For printed wiring board • Refer to page 4-64 for parts location. • This board consists of multiple layers. However, only the sides (layers) A and B are shown. • Chip parts Transistor Diode There are a few cases that the part printed on this diagram isn’t mounted in this model.

  • Page 80: Camera Processor Amp

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. • Refer to page 4-61 for waveforms. VC-272 BOARD(1/12) CAM_15V A_4.75V CAMERA PROCESSOR AMP(CH BLOCK) CAM_-7.0V XX MARK:NO MOUNT D_2.8V TO(10/12) ADCK NO MARK:REC/PB MODE R :REC MODE R279 A_2.8V...
  • Page 81 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. • Refer to page 4-61, 4-62 for waveforms. VC-272 BOARD(2/12) R210 0 Y/C PROCESSOR (CL BLOCK) D_2.8V D_1.5V XX MARK:NO MOUNT L152 10uH L154 10uH NO MARK:REC/PB MODE A_2.8V...

  • Page 82: Focus/Zoom Motor Drive

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. VC-272 BOARD(3/12) FOCUS/ZOOM MOTOR DRIVE(LD BLOCK) R313 2200 XX MARK:NO MOUNT HALL_REF R314 R318 NO MARK:REC/PB MODE C309 0.22u C311 R :REC MODE R317 0.001u R306 R311...

  • Page 83: Rec/Pb Amp

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. • Refer to page 4-62 for waveforms. VC-272 BOARD(4/12) REC/PB AMP(RR BLOCK) RP_4.75V TO(10/12) REG_GND XX MARK:NO MOUNT PB_RF L101 L103 REC_L_CONT NO MARK:REC/PB MODE 220uH 22uH...

  • Page 84: Line Out Amp

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. • Refer to page 4-62 for waveforms. VC-272 BOARD(5/12) LINE OUT AMP(IO BLOCK) NO MARK:REC/PB MODE XX MARK:NO MOUNT A_4.75V C2312 L2301 TO(10/12) 10uH 6.3V REG_GND VIDEO_I/O...
  • Page 85 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. • Refer to page 4-62 for waveforms. VC-272 BOARD(6/12) DRUM_VS SERVO(SE BLOCK) NO MARK:REC/PB MODE : Cannot be measured. R :REC MODE MT_4.75V DRUM_W XX MARK:NO MOUNT...

  • Page 86: Mode Control, Steady Shot

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. • Refer to page 4-62 for waveforms. VC-272 BOARD(7/12) TO(9/12) TO(12/12) TO(1/12,8/12) TO(4/12) TO(1/12,2/12) TO(2/12) TO(1/12) TO(11/12) TO(3/12) MODE CONTROL,STEADY SHOT(VC,SE BLOCK) XX MARK:NO MOUNT NO MARK:REC/PB MODE...

  • Page 87: Hi Control

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. • Refer to page 4-62 for waveforms. LANC_IN VC-272 BOARD(8/12) LANC_OUT HI CONTROL(HI BLOCK) KEY_AD5 XX MARK:NO MOUNT KEY_AD5 XTALLY_LED NO MARK:REC/PB MODE MELODY_ENV XTALLY_LED R569 XLANC_POWER_ON...
  • Page 88 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. VC-272 BOARD(9/12) NO MARK:REC/PB MODE AUDIO(AU BLOCK) R :REC MODE P :PB MODE IC601 XX MARK:NO MOUNT VC_RF_SWP BH2222FV-E2 REC_AFM REC_AFM XVC_SCK PB_RF A_4.9V(VCC) PB_RF A_4.75V R0.5/...

  • Page 89: Dc-Dc Converter

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. • Refer to page 4-62 for waveforms. VC-272 BOARD(10/12) DC-DC CONVERTER(DD BLOCK) XX MARK:NO MOUNT NO MARK:REC/PB MODE R :REC MODE P :PB MODE Q003,004 CHARGE CONTROL...
  • Page 90 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. (CCD-TRV108 ONLY) VC-272 BOARD(11/12) FP-402 CONNECTOR(CN BLOCK) (CCD-TRV108 ONLY) FLEXIBLE CN705 XX MARK:NO MOUNT A_4.75V RB707 A_4.75V N.C. N.C. NO MARK:REC/PB MODE A_2.8V A_2.8V EVF_VG CN714 R :REC MODE ANA_GND D_2.8V...

  • Page 91: Usb Signal Process

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 For Schematic Diagram • Refer to page 4-31 for printed wiring board. VC-272 BOARD(12/12) (CCD-TRV608) Q801 RN2104F(TPL3) R2.9/P3.0 USB SIGNAL PROCESS(USB BLOCK) USB+PULL UP USB_D+PULLUP TO(8/12) USB_DET XX MARK:NO MOUNT R1.4/P0.9 RB801 R816 NO MARK:REC/PB MODE 56x4 1500 R :REC MODE...

  • Page 92: Flexible Board

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 FP-397 FLEXIBLE BOARD 4-3. WAVEFORMS CD-354 VF-150 FP-397 FLEXIBLE BOARD BOARD CAMERA REC IC2001 w; IC2002 rk IC2191 1 3.1Vp-p 7.5Vp-p 5.3Vp-p IC2001 ws IC2191 2 (VIDEO LIGHT) 7.4Vp-p 17.5Vp-p 20 msec IC2001 wf IC2191 3 J201 7.4Vp-p 5.4Vp-p...

  • Page 93: Waveforms

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 PD-156 VC-272 BOARD BOARD IC5501 w; IC271 5 IC5502 rk IC272 e; REC/PB 3.2Vp-p 3.8Vp-p 1.9Vp-p 3.8Vp-p 34.9nsec IC5501 ws IC271 qa IC272 ef REC/PB 0.5Vp-p 2.8Vp-p 3.8Vp-p 69.8nsec IC5501 wf IC271 waws IC272 eh 0.3Vp-p 3.8Vp-p 3.2Vp-p 105nsec IC151 <xzc...
  • Page 94 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 BOARD IC151 wf IC101 4 IC402 1 IC503 td REC/PB REC/PB REC/PB 3.2Vp-p 2.3Vp-p 460mVp-p 30.5 µsec 0.4Vp-p 50 nsec/div 50 nsec IC101 qf IC402 rj IC001 tk IC151 rl REC/PB REC/PB 2.9Vp-p 0.4Vp-p 0.4Vp-p 0.75Vp-p 33.3 ms 50 nsec/div 2.4 µsec...

  • Page 95: Mounted Parts Location

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 4-4. MOUNTED PARTS LOCATION no mark : side A * mark : side B CD-354 BOARD LB-073 BOARD VF-150 BOARD SI-033 BOARD PD-156 BOARD C2191 CN7701 B-1 * C2001 * C750 C5501 L5601 * C2194 C2002 * C751 C5503...
  • Page 96 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 no mark : side A * mark : side B VC-272 BOARD * C001 G-12 C128 C301 * C475 C-15 C2319 * IC601 C-12 * Q354 D-17 R158 * C002 G-12 * C129 B-14 C302 * C476 C-15 C2320...
  • Page 97 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 no mark : side A * mark : side B VC-272 BOARD R806 * R373 D-17 R811 * R379 D-17 * R816 D-10 * R382 C-16 * R817 C-11 * R387 D-16 * R818 C-11 * R388 D-16 * R819...

  • Page 98: Adjustments

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 SECTION 5 ADJUSTMENTS...

  • Page 99: Adjusting Items When Replacing Main Parts And Boards

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Adjusting items when replacing main parts and boards. When replacing main parts, adjust the items indicated by z in the following table. Replaced parts Block replacement Parts replacement Adjustment Adjustment Section Initialization of D, Initialization of D, E, F, 7 page data...
  • Page 100 When replacing the video light, reset the data of page:2, address: E0 to E2 to “00”. *3: Steady shot model (CCD-TRV308/TRV408/ TRV608) Adjustment *4: EVF TYPE S model (CCD-TRV107/TRV308/ Adjustment Section TRV408/TRV608) Initialization of D, Initialization of D, E, F, 7 page data...

  • Page 101: Preparations Before Adjustment

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 5-1. CAMERA SECTION ADJUSTMENT 1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION) 1-1-1. List of Service Tools • Oscilloscope • Color monitor • Vectorscope • Regulated power supply • Digital voltmeter Ref. No. Name Parts Code Usage Auto white balance adjustment/check...

  • Page 102: Preparations

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 1-1-2. Preparations Note1: For details of how remove the cabinet and boards, refer to “2. DISASSEMBLY”. Pattern box Note2: When performing only the adjustments, the lens block and boards need not be disassembled. Connect the equipment for adjustments according to Fig. 5-1-4.
  • Page 103 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Note: Use either a AC power adaptor or a Info-LITHIUM battery as the power supply of the CPC jig for SB. CPC jig for SB (J-6082-539-A) AC power adaptor (8.4Vdc) AC-L10 or AC-VQ800 etc LANC Terminated at 75 Ω...

  • Page 104: Precaution

    STEADY SHOT (Menu display) *2 ........ OFF 13. 16 : 9 WIDE (MENU display) ......... OFF DISPLAY (Menu display) ......... V-OUT/LCD *1: Video light model (CCD-TRV107/TRV308/TRV408/TRV608) *2: Steady shot model (CCD-TRV308/TRV408/TRV608) 2. Order of Adjustments Basically carry out adjustments in the order given.
  • Page 105 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 1-2. INITIALIZATION OF D, E, F, 7 PAGE DATA Processing after Completing Modification of D, E, F, 7 Page data 1. Initializing the D, E, F, 7 Page Data Order Page Address Data Procedure Set the data Note1: If “Initializing the D, E, F, 7 Page Data” is performed, all...
  • Page 106 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 D page 4. F Page table Address Remark Note1: Fixed data-1: Initialized data. (Refer to “1. Initializing the D, E, F, Initial data 7 Page Data”.) Fixed data-2 Fixed data-2: Modified data. (Refer to “2. Modification of D, E, F, 7 Page Data”.)
  • Page 107 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 F page Address Remark Address Remark Initial data Initial data Flange back adj. Fixed data-2 (Modified data. Copy the data built in the same model.) Fixed data-2 EF to F1 Fixed data-1 Fixed data-2 Flange back adj. CAP FG offset adj.

  • Page 108: E Page Table

    COM AMP adj.(LCD) 55 to FF Fixed data-1 White balance adj.(LCD) Table. 5-1-4 Contrast adj.(LCD) Fixed data-1 Fixed data-2 4E to 53 Fixed data-1 Fixed data-2 56 to 6B Fixed data-1 *1: EVF TYPE S model (CCD-TRV107/TRV308/TRV408/ TRV608) Table. 5-1-5. 5-11...

  • Page 109: Camera System Adjustments

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 1-3. CAMERA SYSTEM ADJUSTMENTS Before perform the camera system adjustments, check that the specified values of “VIDEO SYSTEM ADJUSTMENTS” are satisfied. 1. HALL Adjustment For detecting the position of the lens iris, adjust AMP gain and offset. Subject Not required...

  • Page 110: Flange Back Adjustment (Using Minipattern Box)

    Note3: Make the lens horizontal and perform this adjustment. at step 2 and press PAUSE button. Note4: 1/4 CCD model: CCD-TRV308/TRV408/TRV608 1/6 CCD model: CCD-TRV107/TRV108 Note5: The adjustment data will be automatically input to page: F, address: 46 to 55, 58.

  • Page 111: Flange Back Adjustment (Using Flange Back Adjustment Chart And Subject More Than 500M Away)

    Note3: 1/4 CCD model: CCD-TRV308/TRV408/TRV608 1) Set the zoom lens to the TELE end and expose a subject that is 1/6 CCD model: CCD-TRV107/TRV108 more than 500m away (subject with clear contrast such as building, etc.). (Nearby subjects less than 500m away should Switch setting: not be in the screen.)

  • Page 112: Flange Back Check

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 4. Flange Back Check 5. Picture Frame Setting Subject Siemens star Subject Color bar chart (2.0m from the front of the lens) (Color reproduction adjustment frame) (Luminance : approx. 200 lux) (1.5m from the front of the lens) Measurement Point...

  • Page 113: Color Reproduction Adjustment

    3F, 41, AF, B0 Specified Value All color luminance points should settle within each color reproduction frame. Note: CCD TYPE S model: CCD-TRV107/TRV108/TRV608 CCD TYPE M model: CCD-TRV308/TRV408 Switch setting: 1) NIGHT SHOT (Lens block) ..........OFF 2) DIGITAL ZOOM (Menu display) ........OFF 3) STEADY SHOT (Menu display) ........

  • Page 114: Auto White Balance & Lv Standard Data Input

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 7. Auto White Balance & LV Standard Data Input Adjust the white balance reference at 3200K, and adjust the normal coefficient of the light value. Subject Clear chart (Color reproduction adjustment frame) Adjustment Page Adjustment Address 34 to 39 Note1: This adjustment should be carried out upon completion of “Color...

  • Page 115: Auto White Balance Adjustment

    B ratio: 6100 to 6200 5E: 1/6 CCD TYPE S model 61: 1/4 CCD TYPE S model Note1: 1/6 CCD TYPE S model: CCD-TRV107/TRV108 61: 1/4 CCD TYPE M model 1/4 CCD TYPE S model: CCD-TRV608 1/4 CCD TYPE M model: CCD-TRV308/ TRV408 Write down the data.

  • Page 116: White Balance Check

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 9. White Balance Check Subject Clear chart (Color reproduction adjustment frame) Filter Filter C14 for color temperature correction ND filter 1.0 and 0.4 and 0.1 Measurement Point Video output terminal Measuring Instrument Vectorscope Specified Value Fig. 5-1-12. A to B Switch setting: NIGHT SHOT (Lens block) ..........

  • Page 117: Steady Shot Check (Ccd-Trv308/Trv408/Trv608)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 10. Steady Shot Check (CCD-TRV308/TRV408/TRV608) Precautions on the Parts Replacement There are two types of repair parts. Type A: ENC03JA Type B: ENC03JB Replace the broken sensor with a same type sensor. If replace with other type parts, the image will vibrate up and down or left and right during hand-shake correction operations.

  • Page 118: Electronic Viewfinder System Adjustment (Ccd-Trv107/Trv308/Trv408/Trv608)

    (CCD-TRV107/TRV308/TRV408/TRV608) Note1: Electronic viewfinder system adjustment is unnecessary with the EVF TYPE M model. EVF TYPE S model: CCD-TRV107/TRV308/ TRV408/TRV608 EVF TYPE M model: CCD-TRV108 Note2: When replacing the LCD unit, be careful to prevent damages caused by static electricity.

  • Page 119: Rgb Amp Adjustment (Vf-150 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 1. RGB AMP Adjustment (VF-150 board) 1-2. Manual Adjustment Set the D range of the RGB driver used to drive the LCD to the specified value. If deviated, the LCD screen will become blackish Mode Camera or saturated (whitish).

  • Page 120: Contrast Adjustment (Vf-150 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2. Contrast Adjustment (VF-150 board) 2-2. Manual Adjustment Set the level of the VIDEO signal for driving the LCD to the specified value. If deviated, the screen image will be blackish or saturated Mode Camera (whitish). Subject Arbitrary Measurement Point EVF VG Note: Do either of the automatic adjustment or the manual adjustment.

  • Page 121: Lcd System Adjustment

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 1-5. LCD SYSTEM ADJUSTMENT 1. LCD Type Check By measuring the resistor value between Pin 6 of CN5502 and GND, the type of LCD can be discriminated. Note 1: The back light (fluorescent tube) is driven by a high voltage AC power supply.

  • Page 122: Vco Adjustment (Pd-156 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2. VCO Adjustment (PD-156 board) 3. RGB AMP Adjustment (PD-156 board) Set the VCO free-run frequency. If deviated, the LCD screen will Set the D range of the RGB decoder used to drive the LCD to the be blurred.

  • Page 123: Contrast Adjustment (Pd-156 Board)

    2.5 LCD: A = 6.30 ± 0.05V Adjustment Page 3.0 LCD: A = 6.05 ± 0.05V Adjustment Address Note: 2.5 LCD model : CCD-TRV107/TRV108/TRV308/TRV408 Specified Value 2.5 LCD: A = 3.52 ± 0.07V 3.0 LCD model : CCD-TRV608 3.0 LCD: A = 3.32 ± 0.07V Adjusting method: Note: 2.5 LCD model : CCD-TRV107/TRV108/TRV308/TRV408...

  • Page 124: V-Com Adjustment (Pd-156 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6. V-COM Adjustment (PD-156 board) 7. White Balance Adjustment (PD-156 board) Set the DC bias of the common electrode drive signal of LCD to the Correct the white balance. specified value. If deviated, the reproduction of the LCD screen may degenerate.

  • Page 125: Mechanism Section Adjustment

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 5-2. MECHANISM SECTION 2-3. TAPE PATH ADJUSTMENT ADJUSTMENT 1. Preparations for Adjustment Mechanism Section adjustments, checks, and replacement of 1) Clean the tape path face (tape guide, capstan shaft, pinch roller). mechanism parts, refer to the separate volume “8mm Video 2) Connect the adjustment remote commander.

  • Page 126: Video Section Adjustments

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 5-3. VIDEO SECTION ADJUSTMENTS 3-1. PREPARATIONS BEFORE ADJUSTMENTS Use the following measuring instruments for video section adjustments. 3-1-1. Equipment to Required TV monitor Oscilloscope (dual-phenomenon, band width above 30 MHz with delay mode) (Unless specified otherwise, use a 10 : 1 probe.)

  • Page 127: Precautions On Adjusting

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-1-2. Precautions on Adjusting 1) Connect the adjustment remote commander to CN713 of VC- Note1: Setting the “Forced VTR Power ON” mode (VTR mode) 1) Select page: 0, address: 01, and set data: 01. 272 board via CPC jig for SB (J-6082-539-A). To operate the...

  • Page 128: Adjusting Connectors

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-1-3. Adjusting Connectors Some of the adjusting points of the video section are concentrated in CN713 of VC-272 board. Connect the Measuring instrument and the adjustment remote commander via the CPC jig for SB (J-6082- 539-A) to CN713. To operate the adjustment remote commander,...

  • Page 129: Alignment Tape

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-1-5. Alignment Tape The following table lists alignment tapes which are available. Use the tape specified in the signal column for each adjustment. If the type of tape to be used for checking operations is not specified, use whichever type.

  • Page 130: System Control System Adjustment

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-2. SYSTEM CONTROL SYSTEM ADJUSTMENT 2. Switching Position Adjustment (VC-272 board) 1. Initialization of D, E, F, 7 Page Data If deviated in this case causes switching noise or jitter on the played If the D, E, F, 7 page data is erased due to some reason, perform “1- back screen.

  • Page 131: Video System Adjustments

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-4. VIDEO SYSTEM ADJUSTMENTS 2. AFC f Adjustment (VC-272 board) Adjust the pull-in range of the A/D converted clock generator during playback. Video system adjustments must be performed in the following order. Mode VTR stop [Adjusting Order] Signal No signal...

  • Page 132: Y Out Level Adjustment (Vc-272 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3. Y OUT Level Adjustment (VC-272 board) 4. C OUT Level Adjustment (VC-272 board) Set the Y signal output level. (Adjust the D/A converter out put Set the chroma signal output level. (Adjust the D/A converter out level of IC151.) put level of IC151.)

  • Page 133: Rec Y Current Adjustment (Vc-272 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 5. REC Y Current Adjustment (VC-272 board) Adjusting method: Adjust the Y FM signal recording current. Order Page Address Data Procedure Mode VTR recording (SP mode) Set to the stop mode. Signal No signal Set the data. Measurement Point REC RF (Pin 7 of CN713) Write down the data.

  • Page 134: Rec C/Afm Current Adjustment

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6. REC C/AFM Current Adjustment 6-2. REC C Current Check (VC-272 board) Check the recording current level of the REC Chroma signal. If it is 6-1. Preparations too low, chroma signal noise in played back picture will be increased.

  • Page 135: Rec Afm Current Adjustment (Vc-272 Board)

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-3. REC AFM Current Adjustment (VC-272 board) 6-4. Processing after completed adjustment Set the recording levels of the REC AFM signal. If the level is too low, the audio S/N will be deteriorated. If too high, color beets will...

  • Page 136: Audio System Adjustments

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3-5. AUDIO SYSTEM ADJUSTMENTS 1. 1.5 MHz Deviation Adjustment (VC-272 board) Adjust to the optimum 1.5MHz audio FM signal deviation. If the adjustment is not correct, its playback level will differ from [Connecting the measuring instruments for the audio] that of other units.

  • Page 137: Service Mode

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 5-4. SERVICE MODE 4-1. ADJUSTMENT REMOTE COMMANDER 2. Precautions Upon Using the Adjustment Remote Commander The adjustment remote commander is used for changing the calculation coefficient in signal processing, EVR data, etc. The Mishandling of the adjustment remote commander may erase the correct adjustment data at times.

  • Page 138: Data Process

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 4-2. DATA PROCESS The calculation of the DDS display and the adjustment remote commander display data (hexadecimal notation) are required for obtaining the adjustment data of some adjustment items. In this case, after converting the hexadecimal notation to decimal notation, calculate and convert the result to hexadecimal notation, and use it as the adjustment data.

  • Page 139: Service Mode

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 4-3. SERVICE MODE Note: After the completion of the all adjustments, cancel the service mode by either of the following ways. 1) Unplug the main power supply and remove the lithium battery. (In this case, date and time and menu setting have been set by users are canceled.

  • Page 140: Emergency Memory Address

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2. Emergency Memory Address 2-1. EMG code (Emergency code) The codes shown in the following table which correspond to errors that occur are recorded in addresses 10, 14, and 18. Page F Address 10 to 1B Code Type of Emergency...

  • Page 141: Msw Codes

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2-2. MSW codes • The lower parts of the data of addresses 12, 16 and 1A represent the MSW codes (mode switch, mechanism position) when errors occurs. • The upper parts of the data of addresses 12, 16 and 1A represent, when the mechanism position is to be moved, the MSW codes at the start of movement (when moving the loading motor).

  • Page 142: Bit Value Discrimination

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 3. Bit Value Discrimination Bit values must be discriminated using the display data of the Display on the Bit values adjustment remote commander for the following items. Us the table adjustment bit3 bit2 bit1 bit0 below to discriminate if the bit value is “1” or “0”.

  • Page 143: Record Of Use Check

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6. Switch check (3) Page 2 Address 60 to 65 Using method: 1) Select page: 2, address: 60 to 65. 2) By discriminating the display data, the pressed key can be discriminated. Data Address 00 to 0C 0D to 24...

  • Page 144: Record Of Self-Diagnosis Check

    DCR-PC115/PC115E/PC120BT/PC120E 8. Record of Self-diagnosis check Page 2 Address B0 to C6 Address Self-diagnosis code “Repaired by” code (Occurred 1st time) *1 “Block function” code (Occurred 1st time) “Detailed” code (Occurred 1st time) “Repaired by” code (Occurred 2nd time) *1 “Block function”...

  • Page 145: Repair Parts List

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Ver 1.1 2002. 03 SECTION 6 REPAIR PARTS LIST 6-1. EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • Abbreviation The components identified by mark 0or have some differences from the original one. CND : Canadian model dotted line with mark 0 are critical for safety.

  • Page 146: F Panel Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-2. F PANEL SECTION SE751 Video light model LAMP, HALOGEN XB-3D (HL6V/3W) SE750 D750 D752 supplied IC750 MIC901 supplied Video light model supplied Video light model :CCD-TRV107/TRV308/TRV408/TRV608 No video light model No video light model :CCD-TRV108 Ref. No. Part No.

  • Page 147: Cabinet (L) Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-3. CABINET (L) SECTION Battery panel section (See page 6-4) Mechanism deck (See page 6-8 to 6-11) supplied EVF section (See page 6-5) Lens section (See page 6-6) Ref. No. Part No. Description Remarks Ref. No. Part No. Description...

  • Page 148: Battery Panel Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 Ver 1.1 2002. 03 6-1-4. BATTERY PANEL SECTION not supplied TRV608 BT901 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks X-3952-098-1 PANEL (20) ASSY, BATTERY (TRV608) 3-072-202-01 PLATE (20), GROUND, VF X-3952-099-1 PANEL (20) ASSY, BATTERY...

  • Page 149: Evf Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-5. EVF SECTION TRV108 LCD903 LCD903 TRV107/TRV308/ TRV408/TRV608 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-072-196-01 BASE (20), VF A-7078-026-A LB-073 (BW) BOARD, COMPLETE 3-941-343-21 TAPE (A) (TRV107/TRV308/TRV408/TRV608) 3-072-185-01 PLATE (20), FIXED, SLIDE 3-072-214-01 GUIDE (20), LAMP...

  • Page 150: Lens Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-6. LENS SECTION M906 IC2191 not supplied M905 Be sure to read “Precautions upon replacing CCD imager” on page 4-8 when changing the CCD imager. Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 8-848-755-01 DEVICE, LENS LSV-631B 3-318-203-11 SCREW (B1.7X6), TAPPING...

  • Page 151: Cabinet (R) Section

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-7. CABINET (R) SECTION 2.5 inch LCD model 3.0 inch LCD model LCD901 LCD901 ND901 ND901 LCD902 supplied 2.5 inch LCD model :CCD-TRV107/TRV108/TRV308/TRV408 supplied 3.0 inch LCD model :CCD-TRV608 : The printed wiring board of the Control switch block (CF-2000) on which BT001 (lithium battery) is mounted, is not shown.

  • Page 152: Cassette Compartment Assy, Drum Assy

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-8. CASSETTE COMPARTMENT ASSY, DRUM ASSY LS chassis block assembly M901 (See page 6-9) Mechanical chassis block assembly (See page 6-10 to 6-11) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 3-065-935-01 HLC CUT 1.8X4X0.5...

  • Page 153: Ls Chassis Block Assembly

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-9. LS CHASSIS BLOCK ASSEMBLY S001 S002 not supplied Q001 H001 D001 LS-057 H002 not supplied Q002 FP-301 not supplied FP-302 not supplied FP-300 not supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks...

  • Page 154: Mechanical Chassis Block Assembly-1

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-10. MECHANICAL CHASSIS BLOCK ASSEMBLY-1 supplied M902 M903 Mechanical chassis block assembly-2 (See page 6-11) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks A-7096-422-A BASE ASSY, DRUM 3-065-881-01 SPRING, P PRESSURE PLATE 3-947-503-01 SCREW (M1.4) 3-065-934-01 HLW CUT 0.98X3X0.25...

  • Page 155: Mechanical Chassis Block Assembly-2

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 6-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY-2 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-065-920-01 ARM, HC DRIVE 7-624-101-04 STOP RING 1.2 (E TYPE) 3-065-913-01 GEAR (4), LD A-7096-412-A GEAR (T) ASSY, GUIDE 3-065-914-01 SHEET, COVER...

  • Page 156: Electrical Parts List

    CCD-TRV107/TRV108/TRV308/TRV408/TRV608 CD-354 LB-073 PD-156 6-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS When indicating parts by reference number, parts list may be different from the parts All resistors are in ohms. please include the board name.
  • Page 157 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 PD-156 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C5519 1-107-826-11 CERAMIC CHIP 0.1uF Q5601 8-729-042-29 TRANSISTOR RN1104F(TPL3) C5520 1-115-407-11 ELECT CHIP 10uF Q5602 6-550-083-01 TRANSISTOR TPC6C01(TE85R) C5521 1-127-573-11 CERAMIC CHIP (TRV107/TRV108/TRV308/TRV408) C5524 1-127-573-11 CERAMIC CHIP...
  • Page 158 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 SI-033 VC-272 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks A-7078-027-A SI-033 BOARD, COMPLETE C013 1-164-941-11 CERAMIC CHIP 0.0047uF 10% C014 1-164-938-11 CERAMIC CHIP 0.0015uF 10% ********************** (D750, D752, IC750, SE750 and SE751 are C015 1-164-939-11 CERAMIC CHIP 0.0022uF 10%...
  • Page 159 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C116 1-164-943-11 CERAMIC CHIP 0.01uF C277 1-164-943-11 CERAMIC CHIP 0.01uF C117 1-164-943-11 CERAMIC CHIP 0.01uF C278 1-131-861-91 TANTAL. CHIP 4.7uF C119 1-127-760-11 CERAMIC CHIP 4.7uF 6.3V C279 1-127-688-21 TANTAL.
  • Page 160 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C386 1-125-837-91 CERAMIC CHIP 6.3V C491 1-125-777-11 CERAMIC CHIP 0.1uF C389 1-115-467-11 CERAMIC CHIP 0.22uF C492 1-125-777-11 CERAMIC CHIP 0.1uF C390 1-164-937-11 CERAMIC CHIP 0.001uF C501 1-125-777-11 CERAMIC CHIP 0.1uF...
  • Page 161 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C903 1-119-923-81 CERAMIC CHIP 0.047uF < DIODE > (TRV308/TRV408/TRV608) C904 1-119-923-81 CERAMIC CHIP 0.047uF D001 8-719-081-19 DIODE 1SS383(T5RSONY1) (TRV308/TRV408/TRV608) D002 8-719-075-15 DIODE MAZT082H08S0 C905 1-119-923-81 CERAMIC CHIP 0.047uF...
  • Page 162 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks IC503 8-752-928-61 IC CXP921048A-053R-T6 Q007 8-729-043-60 TRANSISTOR CPH6102-TL-E IC504 8-759-679-91 IC S-817A33ANB-CUW-T2 Q008 8-729-054-82 TRANSISTOR XN09D6100LS0 IC601 8-759-713-19 IC BH2222FV-E2 Q009 8-729-054-82 TRANSISTOR XN09D6100LS0 IC701 8-759-183-53 IC TL431CPK-E2 (TRV108)
  • Page 163 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R008 1-218-977-11 RES-CHIP 100K 1/16W R111 1-218-945-11 RES-CHIP 1/16W R010 1-218-989-11 RES-CHIP 1/16W R112 1-218-946-11 RES-CHIP 1/16W R011 1-218-945-11 RES-CHIP 1/16W R113 1-218-945-11 RES-CHIP 1/16W R012...
  • Page 164 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R280 1-218-989-11 RES-CHIP 1/16W R472 1-218-446-11 METAL CHIP 1/16W R281 1-218-985-11 RES-CHIP 470K 1/16W R474 1-218-973-11 RES-CHIP 1/16W R293 1-218-990-11 SHORT R480 1-218-967-11 RES-CHIP 1/16W R294...
  • Page 165 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VC-272 VF-150 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R718 1-208-687-11 METAL CHIP 1.5K 0.5% 1/16W RB452 1-234-378-21 RES, NETWORK 10KX4 (1005) (TRV108) RB501 1-234-375-21 RES, NETWORK 1KX4 (1005) R719 1-208-699-11 METAL CHIP 4.7K 0.5%...
  • Page 166 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 VF-150 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C2013 1-164-943-11 CERAMIC CHIP 0.01uF ACCESSORIES C2014 1-164-876-11 CERAMIC CHIP 120PF ************ C2015 1-125-837-91 CERAMIC CHIP 6.3V 1-467-574-21 REMOTE COMMANDER (RMT-708) C2016 1-125-837-91 CERAMIC CHIP 6.3V...
  • Page 167 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 〈 〉 FOR CAMERA COLOR REPRODUCTION ADJUSTMENT For CCD TYPE S CCD-TRV107/TRV108/TRV608 Take a copy of CAMERA COLOR REPRODUCTION FRAME with a clear sheet for use. For CCD TYPE M CCD-TRV308/TRV408 — 215 —...
  • Page 168 CCD-TRV107/TRV108/TRV308/TRV408/TRV608 2001L1600-1 Sony EMCS Co. 9-929-926-11 ©2001.12 — 216 — Published by DI Customer Center...

  • Page 169: Revision History

    Reverse 992992612.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2001.12 Official Release — — 2002.03 Correction-1 Error correction (PV01-059) S.M. correction: Page 6-1,...

This manual is also suitable for:

Handycam ccd-trv308Handycam ccd-trv408Handycam ccd-trv108Handycam ccd-trv608Rmt-708Cd-trv108 ... Show all

Table of Contents