Download Print this page

Jensen Marine MWR150 Installation And Operation Instructions

Wired remote

Advertisement

Quick Links

MWR150 Wired
Remote Installation
and Operation
Instructions
IntroductIon
Thank you for choosing a Jensen product. The MWR150
Marine Wired Remote Control allows you to control basic
functions of most Jensen Marine MS series radios, including
power, mode, volume, tuning and CD, iPod and satellite radio
operation.
Features
Compatible with JENSEN Marine MS Series radios with
remote control capability ONLY
Waterproof design (IPX6 Rated)
Conformal Coated circuit boards
White LED backlit controls and LCD
Full function sunlight readable display (positive type LCD)
UV resistant finish (meets ASTMD4329 standards) resists
yellowing in sunlight
Corrosion resistant materials (meets ASTMB117)
Panel mount with removable trim ring
20 ft. extension cable included
FCC/CE certified
InstallatIon
1. Choose a mounting location on the instrument panel
that will allow enough room behind the panel to run the
wired remote cables to the existing radio.
2. Cut a hole in the instrument panel using the supplied
template (See "Mounting Template" on page 2). At least
1" depth is needed to mount the remote control.
IMPORTANT! Do not mount unit where it can be
submerged.
3. Insert the remote control into the hole and then secure
with two #6 Pan Head Screws, at least 3/4" long,
illustrated in Figure A.
Figure a - Installation
#6 Pan Head Screw
3/4" Min. Length
WIrIng
Once the remote has been mounted, route the cable from
the remote and connect the cable to the radio. Note the
connector polarity on the extension cable. The 18 foot
extension cable may be used to connect the remote to the
radio. Up to two additional extension cables (MWREXT) may
be purchased and used to extend the reach of the remote up
to 54 feet.
IMPORTANT! When connecting the cables, be sure to
route the extension cable away from sharp objects,
corners, and places where it might get pinched, as this
could affect performance and cause damage to the unit.
Up to two more remote controls can be added with a "Y"
cable adapter (MWRYCBLS).
1
Trim ring

Advertisement

loading

Summary of Contents for Jensen Marine MWR150

  • Page 1 Operation 3/4” Min. Length Instructions IntroductIon Thank you for choosing a Jensen product. The MWR150 Marine Wired Remote Control allows you to control basic Trim ring functions of most Jensen Marine MS series radios, including power, mode, volume, tuning and CD, iPod and satellite radio operation.
  • Page 2 operatIon AM/FM Tuner MP3 Playback iPod Satellite Radio Mode Control Action Default Mode Mode Main Mode Main Mode Main Mode POWER Press Power On/Off Power On/Off Power On/Off Power On/Off Power On/Off MODE Press Select Next Mode Select Next Mode Select Next Mode Select Next Mode Select Next Mode...