2
Basic Functions
Loading originals
Using the
scanner glass
Using the ADF
You can place originals for copying, scanning, or faxing on the scanner
glass or in the ADF (automatic document feeder). Originals placed in
the ADF are fed into the printer automatically.
To place an original on the scanner glass:
1. Remove any originals from the automatic document feeder (ADF).
2. Lift the scanner lid, and place the document or picture face down
in the right-front corner.
3. Close the scanner lid.
You can load up to 30 originals (20 to 24 lb / 75 to 90 gsm plain
paper) in the automatic document feeder (ADF).
The ADF accepts originals from 6.9 x 9.8 in. / 175 x 249 mm to
8.5 x 14 in. / 216 x 356 mm.
Do not load photographs in the ADF.
IMPORTANT:
1. Move the ADF paper-edge guides outward.
www.kodak.com/go/aiosupport
8