Stanley FatMax FMC645 User Manual
Hide thumbs
Also See for FatMax FMC645:
- Original instructions manual (8 pages) ,
- Original instructions manual (81 pages) ,
- Original instructions manual (85 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for Stanley FatMax FMC645
Summary of Contents for Stanley FatMax FMC645
- Page 1 FMC645...
-
Page 3: Intended Use
3. Personal safety a. Stay alert, watch what you are doing and use common Your Stanley Fat Max impact wrench has been designed for sense when operating a power tool. Do not use a screwdriving and nut setting applications. This tool is intended power tool while you are tired or under the influence for professional and private, non professional users. - Page 4 ENGLISH (Original instructions) e. Maintain power tools. Check for misalignment or Hold power tool by insulated gripping surfaces when binding of moving parts, breakage of parts and any performing an operation where the fastener may other condition that may affect the power tools contact hidden wiring.
- Page 5 Impairment of hearing. Chargers Health hazards caused by breathing dust developed when Use your Stanley Fat Max charger only to charge the bat- using your tool (example:- working with wood, especially tery in the tool with which it was supplied. Other batteries oak, beech and MDF.)
- Page 6 ENGLISH (Original instructions) Assembly The charge is complete when the charging indicator (11) lights green continuously. The charger and the battery can be Warning! Before assembly, remove the battery from the tool. left connected indefinitely with the LED illuminated. The LED will change to flashing green (charging) state as the charger Fitting and removing the battery (fig.
-
Page 7: Maintenance
Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Stanley Fat Max product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product avail-... -
Page 8: Ec Declaration Of Conformity
These products also comply with Directive Output Voltage 2004/108/EC and 2011/65/EU. For more information, please Current contact Stanley Europe at the following address or refer to the back of the manual. 90 - 240 45 - 120 Approx. charge time... - Page 9 If you wish to make a claim, contact your seller or check the location of your nearest authorised Stanley Fat Max repair agent in the Stanley Fat Max catalogue or contact your local Stanley office at the address indicated in this manual. A list of authorised Stanley Fat Max repair agents and full details of our after sales service is available on the internet at:www.
- Page 12 United Kingdom Stanley Fat Max Tel. 01753 511234 210 Bath Road Fax 01753 572112 Slough, Berkshire SL1 3YD www.stanleytools.co.uk 90604402 REV-0 03/2014...