Oven Temperature Control - KitchenAid KDRS505XSS Use & Care Manual
Dual fuel double oven range
Hide thumbs
Also See for KDRS505XSS:
- Specification sheet (2 pages) ,
- Installation instructions manual (40 pages) ,
- Use & care manual (56 pages)
Table of Contents
Advertisement
Available languages
Available languages
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is factory preset for the 12-hour format.
To Change the Clock to 24-Hour Format:
1. Press OPTIONS seven times until “12/24 HOUR” appears in
the upper text area and “12 HR. Press 1 for 24 Hr” scrolls
twice in the lower text area.
2. Press “1” once to select 24 hour and again to select 12 hour.
3. Wait 30 seconds or press CANCEL to accept the setting.
Sabbath Mode
Sabbath Mode is used to configure the oven system so that
certain features and modes are disabled or defeatured. By
enabling Sabbath Mode, the oven will conform to Star-K Jewish
Sabbath requirements.
The oven is factory preset with Sabbath Mode Off.
To Enable Sabbath mode:
1. Press OPTIONS eight times until “SABBATH” appears in the
upper text area.
2. Press “1” to enable Sabbath Mode.
3. “ON Selected” will scroll twice in the text area. The oven is
now activated to be run in Sabbath Mode. To set Sabbath
Mode, see the “Automatic Shutoff/Sabbath Mode” section.
12-Hour Auto Off
The oven control is factory preset to automatically shut off the
oven 12 hours after the oven turns on. This will not interfere with
any timed or delayed cook function.
To Cancel 12-Hour Auto Off:
1. Press OPTIONS nine times until “12 Hr AUTO_OFF” appears
in the upper text area and “ON. Press (1) for Off” scrolls twice
from right to left in the lower text area.
2. Press “1” to turn off the 12-hour Auto Off feature.
“OFF. Press (1) for ON” will scroll twice from right to left in the
lower text area.
3. “OFF Selected” will scroll twice from right to left in the lower
text area. The feature has been turned off.
Language
The Language is factory preset to English but can be changed to
French.
To Change the Language to French:
1. Press OPTIONS 10 times until “LANGUAGE” appears in the
upper text area and “ENGLISH. Press (1) for French” scrolls
twice from right to left in the lower text area.
2. Press “1” to select French.
“FRENCH. Press (1) for English” will scroll, in French, twice
from right to left in the lower text area.
3. “FRENCH Selected” will scroll, in French, twice from right to
left in the lower text area.
4. The language displayed will now be French.
Oven Temperature Control
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
Temperature adjustment applies to upper or lower ovens.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
ADJUSTMENT °F
COOKS FOOD
(ADJUSTMENT °C)
10°F (6°C)
...a little more
20°F (12°C)
...moderately more
30°F (17°C)
...much more
-10°F (-6°C)
...a little less
-20°F (-12°C)
...moderately less
-30°F (-17°C)
...much less
To Adjust Oven Temperature Calibration:
1. Press OPTIONS 11 times until “TEMP CALIB” appears in the
upper text area and “UPPER CALIBRATE. Press (1) for Lower
calibrate or push START” scrolls twice from right to left in the
lower text area.
2. Press START to calibrate the upper oven. UPPER Calibrate
selected” will scroll twice from right to left in the lower text
area. “Press (3) to increase (6) to decrease” scrolls twice from
right to left in the lower text area.
OR
Press “1” to calibrate the lower oven. “LOWER Calibrate
selected” scrolls twice from right to left in the lower text area.
“Press (3) to increase (6) to decrease” scrolls twice from right
to left in the lower text area.
3. Each press of the “3” or “6” number pad will increase or
decrease the offset by 5°F (3°C) increments. The adjustment
can be set between 30°F (17°C) and -30°F (-17°C).
4. Press OFF to set the adjustment and exit the Temperature
Calibration menu.
Page 11
Hide quick links:
Advertisement
Table of Contents
