Keys Fitness CardioZone CZ PRO Owner's Manual

Keys fitness treadmill owner's manual

Advertisement

OWNER'S MANUAL
Model Name CZ PRO
Serial Number
Purchase Date
Part# 15-0155
06/04
CZ PRO
Write down for future reference.
CardioZone Technical Service, (877) 855-0003
TREADMILL

Advertisement

Table of Contents
loading

Summary of Contents for Keys Fitness CardioZone CZ PRO

  • Page 1 CZ PRO OWNER’S MANUAL Model Name CZ PRO Serial Number Purchase Date CardioZone Technical Service, (877) 855-0003 Part# 15-0155 06/04 TREADMILL Write down for future reference.
  • Page 2: Table Of Contents

    Table of Contents Information Table of Contents Specification Sheet Important Safety Information Before You Start Warm Up Exercises Assembly, Moving Instructions Power Requirements Console Functions and Descriptions Program and Operating Instructions Program Descriptions and Profiles Belt Adjustments and Tension Change to MPH or Km/H Maintenance Instructions Troubleshooting Guide Error Messages...
  • Page 3: Specification Sheet

    Specification Sheet Horsepower (Continuous) Display Type Electronics Pre-Set Programs Custom Programs Speed/Incline Toggle Switches Power Incline Roller Diameter Cushioned Deck Speed Range Belt Size Side Hand Rails Foot Print Folded Foot Print Warranty Motor Warranty Parts Warranty Labor Warranty Frame 2.5hp 4 Window LCD Push button...
  • Page 4: Important Safety Information

    This treadmill has a user maximum capacity of 275 pounds. The treadmill should only be used on a level surface and is intended for indoor use only. The tread- mill should not be placed in a garage, patio, or near water and should never be used while you are wet.
  • Page 5: Before You Start

    Before You Start Thank you for purchasing the CZ Pro treadmill! This quality product you have chosen was designed to meet your needs for cardiovascular exercise. Before you start, please read the Owner's Manual and become familiar with the operation of your new treadmill.
  • Page 6: Warm Up Exercises

    Warm Up Exercises EXERCISE GUIDELINES WARNING! Before beginning this or any exercise program, you should consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. Warming up prepares the body for the exercise by increasing circulation, supplying more oxygen to the muscles and raising body temperature.
  • Page 7: Assembly, Moving Instructions

    Assembly, Moving Instructions Assembly The CZ PRO treadmill is shipped in one piece and fully assembled. After opening the box, remove any pack- ing materials from the treadmill. Do not throw away any packing materials until the unit is working properly.
  • Page 8: Power Requirements

    This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges, and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
  • Page 9: Console Functions And Descriptions

    Console Functions and Descriptions There are four display windows on the control panel to provide feedback information. TIME WINDOW TIME: Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 sec- onds) INTERVAL TIME: Indicates countdown in seconds to the next interval starting at 5 seconds and counting to 0 seconds SPEED WINDOW SPEED: Indicates MPH (miles per hour) or KMH (kilometer per hour) in .1 increments...
  • Page 10: Program And Operating Instructions 10

    Program and Operating Instructions QUICK START / MANUAL MODE Plug into a surge protector outlet. Attach the Red Safety Key on to the treadmill console. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes. Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered.
  • Page 11 Program and Operating Instructions PROGRAM MODE Plug treadmill into a surge protector outlet. Attach the Red Safety Key on to the treadmill console. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes. Press POWER button. There will be an eight (8) second delay before data can be entered. The TIME window will flash.
  • Page 12: Program Descriptions And Profiles

    1 2 3 4 5 6 7 8 9 1 0 The Warm Up Program is designed to gradually increase the treadmill Speed and Elevation in the first segment (warm up) and gradually decrease the treadmill Speed and Elevation in the last segment (cool down).
  • Page 13: Belt Adjustments And Tension

    Refer below to the “Walking Belt Slipping” instructions. WALKING BELT IS SHIFTING TO THE RIGHT First, turn the treadmill on to run at 1 mph. Using the hex key pro- vided, turn the right rear roller adjustment bolt ¼ turn in the clock- wise direction.
  • Page 14: Change To Mph Or Km/H

    All treadmills are calibrated at the factory for British Units (miles per hour). To change the display to read in kilometers, follow the steps described here: 1) Turn power OFF on the console. (Do not unplug treadmill) Attach the magnet safety key to the con- sole.
  • Page 15: Maintenance Instructions

    6” from the front of the treadmill. Apply the silicone spray to the walking board, moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 4 seconds on each side.
  • Page 16: Troubleshooting Guide

    (Refer to “Power Requirements” on page 8) 3 Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait five minutes and then press the switch back in.
  • Page 17: Error Messages

    Safety Interlock Error Messages SI 1 - Safety key missing, replace and try again. SI 2 - Over voltage protection trip. Notify Keys Fitness Technical Service. Other Error Messages E11 - Lack of speed feedback data from belt motor. Attempt re-calibration. See Calibration Sequence section for detailed information.
  • Page 18: Calibration Sequence

    Calibration Sequence Our treadmill is equipped with a software package that will perform a calibration sequence unique to your specific model number. Please perform the following steps to calibrate the Cardio Zone CZ PRO TREADMILL. 1. Unplug power cord from outlet strip.
  • Page 19: Parts And Diagrams

    Please review the following drawing below to familiarize yourself with the listed parts. This man- ual covers several treadmills, so the one pictured below may not be identical to your particular model. Left Side Extr usion Rail Right Side Extr usion Rail Treadmill Belt Front Roller Assembly Rear Roller Treadmill Deck End Cap (L/R)
  • Page 20: Warranty Registration (Mail In Form)

    This Limited Warranty becomes VALID ONLY if the treadmill is assembled/installed by a Keys Fitness authorized dealer/technician unless oth- erwise authorized by Keys Fitness in writing (if anyone other than a Keys Fitness authorized dealer/technician assembles a Keys Fitness treadmill the warranty will be void unless accompanied by written authorization by Keys Fitness).

Table of Contents