Page 2
Supervision is provided by transmitting a low power Figure 2: Installing the Batteries level signal to the receiver every 13 min if there is no other activity. All transmissions from the RF280E Series send battery status information to the control panel. Mounting The detector’s maximum wireless range in...
Page 3
RF280E Series | Installation Instructions | 4.0 Testing Programming Manual Test 1. Press and hold the Test button (Item 1 in Figure 3). Refer to your control panel wireless reference guide for programming information. 2. Observe the Alarm and Test LED (Item 2 in Figure 3).
RF280E Series | Installation Instructions | Thermistor Test 3. Grasp the chamber cover and pull it up and away Thermistor Test from the chassis (Figure 5). Figure 5: Removing the Chamber Cover Use the Thermistor Test for the RF280ETH and RF0280ETHS Models only.
Compatible Control Panels Solution Ultima Models 844, 862, and 880. RF3222E Compatible Receivers RF3212E Patents The RF280E Series Smoke Detectors are protected by one or more of the following patents: #5,400,014 #5,543,777 #D339,078 ,089 #DES,293 Bosch | 12/04 | 43177D...