Table of Contents
Advertisement
Assembly Manual Cross-Trainer „MONDEO"
Assembly must be carried out by an adult!
Thank you for purchasing our high quality KETTLER product.
If you have any questions or concerns regarding this product, please contact us:
KETTLER International, Inc.
Parts & Service Department
P.O.Box 2747
Virginia Beach, Virginia 23450 USA
Please have this owner's manual with you when you call.
Item # 07852-690
DO NOT CONTACT YOUR RETAILER.
E-mail parts@KETTLERUSA.COM
Tel: 757-427-2400 ext. 81
Fax: 757-563-9273
USA
Advertisement
Table of Contents
Related Manuals for Kettler MONDEO 07852-690
Summary of Contents for Kettler MONDEO 07852-690
- Page 1 Assembly Manual Cross-Trainer „MONDEO” Item # 07852-690 Assembly must be carried out by an adult! Thank you for purchasing our high quality KETTLER product. If you have any questions or concerns regarding this product, please contact us: KETTLER International, Inc.
- Page 2 For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. Use only original KETTLER spare parts. If the equipment is in regular use, check all its components thoroughly every 1 -2 months.
- Page 3 For technical reasons, we reserve the right to carry out preli- minary assembly work (e.g. addition of tubing plugs). should be clearly stated on the order by adding the words „with fastening material“. KETTLER International Inc. P. B. 2747 · Virginia Beach · VA 23450-2747 USA http://www.kettlerusa.com...
- Page 4 Checklist (contents of packaging)
- Page 5 Checklist (contents of packaging) ø25x8,4 ø25x10,4 ø21x8,4 ø12,5x6,4 M10x105 ø22,2x27,5 ø42 M6x50 M8x20 M5x20 SW 10/13 SW 17...
- Page 6 The screwed connections must be controled at regular intervals. IMPORTANT! Due to technical reasons the screws with the curved washer (E) have to be tightend first. Tighten the screws with the flat washer (F) last.
- Page 7 IMPORTANT! First, preassemble the connection on step 2 loosely. Second, go to step 3. Third, go back to step 2 and tighten the connections firmly.
- Page 9 Handling Handling For products with power supply: Attention! Only use with origi- nal power unit as supplied, or with original KETTLER spare part (see spare part list). Otherwis this may result in damage.
- Page 10 Handling PRI: 110V ≈ 50Hz 50mA SEC : 6V 500mA 3VA Spare parts order Crosstrainer MONDEO Pos- Description Base Frame (07852-690) Adapter Ring Ski Pole Bearing 6203-ZZ Drive Axle 17x114.5 "C" Clip 17mm (17 DIN 471) "C" Clip 44mm (I 40 DIN 472) Frame Crossmembers Right Transport Castor Left Transport Castor...
-
Page 11: Spare Parts Order
Spare parts order Crosstrainer MONDEO Pos- Description Spring for Magnet Tension 1.6mm Idler Pulley w/ Bearings 6300-ZZ distanz sleeve ø22.2x2x5 mm Spring for Belt Tension 3.5mm Flywheel + Pos. 25 + 26 Bearing for Drive Axle 6203-ZZ Bearing for Flywheel 6203-ZZ C3 (Pos. 23) Bearing 6005-ZZ (w/o fig.) (Pos. - Page 12 Spare parts order In case of complaint, please state the control number/ S/N.