Direct Search; Traffic Information - Kenwood KVT-617DVD Instruction Manual

Direct Search

Tunes in a station when its frequency is entered.
1
Select a band
2
Select the Direct Search mode
3
Enter frequency
—
When you enter frequency, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
• The operation ends automatically if you do not operate
within 10 seconds.
36
|
English

Traffic Information

When a traffic bulletin starts, any source is switched
to the traffic information and it is displayed
automatically.
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
1
T U N E R
2
3
Traffic Information
1
1 Adjusts the volume.
2 Calls the Sound Effects Menu. (page 78)
3 Calls the Setup Menu. (page 60)
4 Turns the Traffic Information function on or off.
If you continue to listen to the audio source
during traffic bulletin...
• It is necessary to have Traffic Information function set
to On in order to have the Traffic Information screen
appear automatically.
• During reception of traffic information the adjusted
volume is automatically remembered. When switched
to the traffic information again, the volume is set to the
remembered level automatically.
1
13:50
4
T I
1