Audio Control; Audio Control Menu; Src; In This Manual, The Above Selection Is Indicated As: Touch - Kenwood DDX6046BT Instruction Manual

Audio Control

Audio Control Menu

Displays the Audio Control menu to set the sound
effect function of this unit.
1 Display the Source Select Screen

SRC

2 Display the Audio Control menu
In this manual, the above selection is indicated
as:
>
Touch [ ] [ ].
3 Select the Audio Control item
Item
[Audio Control]
[Equalizer]
[Tone]
[Zone Control]
DDX SERIES DDX616/DDX6046BT/DDX516
Audio Control
You can adjust the front/rear and right/left audio
balance.
1 Display the Audio Control screen
Touch [
2 Set each item
1 Adjusts the front/back and left/right balance
[VOL.Offset] Finely adjust the volume of the
⁄
•
[Subwoofer Level] Adjusts the subwoofer
[Loudness] Turns the loudness control
Page
59
60
[Stream Information] Displays the present
60
61
> >
] [ ] [Audio Control]. (page 59)
1 1 1
of the volume by touching the Adjust screen.
[2], [3] Adjusts the right and left volume
balance.
[5], [∞] Adjusts the front and rear volume
balance.
current source to minimize the difference in
volume between different sources.
If you have increased the volume first, then reduced
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
volume.
The setting is available when subwoofer is set
to "ON". See <Speaker Setup> (page 75).
function On or Off.
If turned "ON", high and low tones are
automatically enhanced during low volume.
Settable only when zone function is set to Off.
See <Zone Control> (page 61).
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
English 59