Kenwood DDX6046BT Instruction Manual

Kenwood DDX6046BT Instruction Manual

Gps navigation system dnx series; monitor with dvd receiver ddx series
Hide thumbs Also See for DDX6046BT:
Table of Contents

Advertisement

GPS NAVIGATION SYSTEM
DNX SERIES
DNX6960
DNX6460BT
MONITOR WITH DVD RECEIVER
DDX SERIES
DDX616
DDX6046BT
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160/DDX616/DDX6046BT/DDX516
Serial number
US Residents Only
Register your Kenwood product at
www.Kenwoodusa.com
© B64-4602-00/02 (KW/K2W/RW)
DNX6160
DNX5160
DDX516
Register Online
DNX6020EX

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood DDX6046BT

  • Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160/DDX616/DDX6046BT/DDX516...
  • Page 2: Table Of Contents

    Contents Before Use Notes How to read this manual Functions of the buttons on the front panel Getting Started How to Display the Navigation Screen How to Select the Source How to Set a Medium / a Device Basic Operation How to Display the Source Control Screen 14 How to Display Top Menu Screen Operation on the Playback Screen of Visual...
  • Page 3 Music CD/Audio file/Video file/ Picture file (AUD mode) Radio (AUD mode) iPod (AUD mode) USB (AUD mode) NAV (NAV mode) (RC-DV331 only) DDX SERIES DDX616/DDX6046BT/DDX516 Setup Menu How to Display SETUP Menu Screen DivX Setup (DNX6460BT/DDX6046BT) Software Information User Interface...
  • Page 4: Before Use

    • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed.
  • Page 5: Notes

    Others Dualdisc × Super audio CD Only CD layer can be played. *DivX Playable models : DNX6460BT and DDX6046BT ‡ : Playback is possible. % : Playback is partly possible. × : Playback is impossible. ⁄ • DNX6460BT/DDX6046BT : When buying DRM enabled contents, check the Registration Code in the <DivX Setup>...
  • Page 6 Changing the browse item will display a correct title, etc. • When the iPod is connected to this unit, "KENWOOD" or "✓" is displayed on the iPod to indicate that you cannot operate the iPod. DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160 About USB device •...
  • Page 7 16:9 LB on a standard TV set screen (4:3) with a black band at both the top and bottom of the screen (letter box). DDX SERIES DDX616/DDX6046BT/DDX516 Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing.
  • Page 8: How To Read This Manual

    How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different.
  • Page 9 Names of models included in each model group are as follows: series DNX6960, DNX6160, DNX6020EX, DNX6460BT, T T DNX5160 series DDX616, DDX6046BT, T T DDX516 O ther marks Important precautions are described to , for 2 prevent injuries etc. 2sec.
  • Page 10: Functions Of The Buttons On The Front Panel

    Functions of the buttons on the front panel Remote control sensor Reset button (page 4) For DNX series microSD card slot for upgrading the navigation system (page 13) Input jack for external device Ejects the disc. DNX series DNX series Displays the navigation screen.
  • Page 11 If the ferritic core may scratch the vehicle, wrap it with the cushion sheet (Accessory of this unit). Approx. 10 cm (3-15/16 inch) R-CAM NAV MAP AV-IN DDX SERIES DDX616/DDX6046BT/DDX516 Functions of the buttons on the front panel & ⁄ & Ferritic core...
  • Page 12: Getting Started

    Getting Started How to Display the Navigation Screen DNX series DNX series The navigation screen appears. DDX series DDX series The navigation screen appears. • For how to set up and use the navigation function, see the Navigation Instruction Manual. ⁄...
  • Page 13: How To Set A Medium / A Device

    USB device. See <Source Control Screen> (page 23). ⁄ • The playback starts automatically after setting the media or the device. DDX SERIES DDX616/DDX6046BT/DDX516 DNX series DNX series 7 microSD card This microSD card slot is used to upgrade the Navigation System.
  • Page 14: Basic Operation

    Basic Operation How to Display the Source Control Screen On the Source Control screen you can find all the control buttons for the selected source. Source Control screen • For how to use each button, see the operation pages of each source. How to display the Source Control screen DNX series DNX series...
  • Page 15: How To Display Top Menu Screen

    The Top Menu screen appears. • For DDX series Pressing the [TOP] button on the front panel also displays the Top Menu screen. DDX SERIES DDX616/DDX6046BT/DDX516 Buttons on the Top Menu screen [NAV V ] Switches to the navigation screen.
  • Page 16: Operation On The Playback Screen Of Visual Sources

    Basic Operation Operation on the Playback Screen of Visual Sources While watching visual sources, basic operation is possible by touching the screen. The screen has 4 function areas. The function of each area is different depending on the sources. (Some areas are unavailable for some sources.) Playback screen of a visual source Basic operation of each area 1 Reverse search.
  • Page 17: How To Display The Easy Control Screen

    See the operation pages of each source. While watching the visual source R-CAM The Easy control screen appears. ⁄ • Easy Control screen is hidden when you touch the central part of the monitor. DDX SERIES DDX616/DDX6046BT/DDX516 Basic Operation English...
  • Page 18: Watching Dvd/Video Cd

    Watching DVD/Video CD You can play DVD/Video CD using various functions. • Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller mode switch> (page 84). Playback Screen Basic functions are available even when the playback screen is displayed.
  • Page 19: Source Control Screen

    1 Information display Title display. "Title" Title Number Display "Chap" Chapter Number Display "Scene"/ "Track" Scene/Track Number Display DDX SERIES DDX616/DDX6046BT/DDX516 "3" Play Mode Display "T"/ "C"/ "R"/ "P" Play Time Display ] When scrolled by touching it. Multi Function ] Closes the multi function bar.
  • Page 20: Dvd-Video Disc Menu

    Watching DVD/Video CD DVD-VIDEO Disc Menu Selects an option from the DVD-VIDEO Disc Menu. Display the Playback Screen See <Operation on the Playback Screen of Visual Sources> (page 16). Display the Menu Control 1 screen Operation on the Menu Control 1 screen [Menu] Calls the Menu.
  • Page 21: Dvd-Vr Menu Control

    [2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Return] Returns to the Menu Control 2 screen. [Exit] Exits the Zoom Control screen. DDX SERIES DDX616/DDX6046BT/DDX516 DVD-VR Menu Control Selects an option from the DVD-VR Disc Menu. Display the playback screen See <Operation on the Playback Screen of Visual...
  • Page 22: Video Cd Zoom Control

    Watching DVD/Video CD Video CD Zoom Control Displays an enlarged VCD screen. Display the playback screen See <Operation on the Playback Screen of Visual Sources> (page 16). Display the Zoom Control Operation on the Zoom Control screen [Zoom] Changes the zoom ratio at 2 levels (2 times or off ) each time you touch.
  • Page 23: Music Disc/ Audio File Listening & Video File/ Picture File Watching

    [4], [¢] Selects a track/ file. ], [ Audio File Audio File MPEG/DivX® MPEG/DivX® Selects a folder. DDX SERIES DDX616/DDX6046BT/DDX516 [List] Displays the folder list or play list. (page 24) ] Switches to the playback screen. 1 Information display Audio File Audio File "Track"...
  • Page 24: List Select

    Music Disc/ Audio File Listening & Video File/ Picture File Watching Audio File Au Au Au Au Audio File MPEG/DivX® MPEG/DivX® [REP] Repeats the present file or data. [FREP] Repeats the music or data of the present folder. [RDM] Starts or stops Random Play (to play files of the present folder in random order).
  • Page 25: Usb Device Select

    [CTRL] Returns to the Source Control screen. Scrolls to the position of the specified initial Scrolls to the selected initial. DDX SERIES DDX616/DDX6046BT/DDX516 USB Device Select Selects the connected USB device (or a partition). Display the Source See <Source Control Screen> (page 23).
  • Page 26: Link Search (Audio File In Usb)

    Music Disc/ Audio File Listening & Video File/ Picture File Watching Link Search (Audio file in USB) Searches for another song of the currently selected artist. Display the Source Control Screen See <Source Control Screen> (page 23). Start Link search Select a song 1 Plays the touched song.
  • Page 27: Easy Control Screen (Video File, Picture File)

    Disc When touched twice, the disc is played from its beginning when you play it the next time. [38] Plays or pauses. DDX SERIES DDX616/DDX6046BT/DDX516 Picture Control Adjusting the picture display. Display the Playback Screen See <Operation on the Playback Screen of Visual Sources>...
  • Page 28: Movie Menu Control

    Music Disc/ Audio File Listening & Video File/ Picture File Watching Movie Menu Control Selects an option from the Movie Menu. Display the playback screen See <Operation on the Playback Screen of Visual Sources> (page 16). Display the Menu Control screen Operation on the Menu Control screen [SUB] Switches the subtitle language.
  • Page 29: Ipod Control

    (Resume Function). • If the played song is not a video content, "No Video Signal" is displayed on the video screen. DDX SERIES DDX616/DDX6046BT/DDX516 Easy Control Screen Displays the basic operation buttons on the screen. Display the Easy Control Screen See <How to Display the Easy Control Screen>...
  • Page 30: Source Control Screen

    iPod Control Source Control Screen Switches to the source control screen to use various playback functions. Display the Source Control Screen See <How to Display the Source Control Screen> (page 14). Operation on the Source Control Screen [38] Plays or pauses. [1], [¡] Fast Forwards or Fast Backwards.
  • Page 31: Ipod List

    [CTRL] Returns to the Source Control screen. Scrolls to the position of the specified initial Scrolls to the selected initial. DDX SERIES DDX616/DDX6046BT/DDX516 Link Search (Music file) Searches for another song of the currently selected artist. Display the Source Control Screen See <Source Control Screen>...
  • Page 32: Radio Listening

    Radio Listening Various control screens appear in the Tuner Source mode. • Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch> (page 84). Source Control Screen Switches to the source control screen to use various functions.
  • Page 33: Preset Select

    Station name or Program Service Name. [CTRL] Returns to the Source Control screen. ⁄ • * North American sales area only. DDX SERIES DDX616/DDX6046BT/DDX516 Auto Memory Stores stations with good reception in memory automatically. Display the Source Control Screen See <Source Control Screen>...
  • Page 34: Manual Memory

    Radio Listening Manual Memory Stores the current receiving station in memory. Display the Source Control Screen See <Source Control Screen> (page 32). Select a station you wish to store in memory Store in memory 2 sec. Continue to touch until the memory number appears.
  • Page 35: Set Station Name

    Enter the name See <Character Entry> (page 45) for information on how to enter a name. End Name set DDX SERIES DDX616/DDX6046BT/DDX516 Traffic Information (North American sales area only) When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically.
  • Page 36: Search By Program Type (North American Sales Area Only)

    Radio Listening Search by Program Type (North American sales area only) A program is tuned when you set its program type. (Only when receiving the FM broadcast) Display the Source Control Screen See <Source Control Screen> (page 32). Enter Program Type Search mode Select a Program Type 1 Program Type is displayed.
  • Page 37: Sirius/Xm Control (North American Sales Area Only)

    "Preset" Preset number "ch" Channel display ] When appears, the text display is scrolled by touching it. DDX SERIES DDX616/DDX6046BT/DDX516 Multi Function [1/2] Switches the multi function display. ] Closes the multi function bar. ] Opens the multi function bar.
  • Page 38: Channel Search

    SIRIUS/XM Control (North American sales area only) Channel Search Specifying the desired category and selecting a channel. Display the Source Control Screen See <Source Control Screen> (page 37). Display the Category List Screen Select a category 1 Selects a category. Displays all the channels in the selected category.
  • Page 39: Direct Channel Search

    Control Screen See <Source Control Screen> (page 37). Start Direct Channel Search Enter the channel number 1 Enters the channel number. [Cancel] Cancels the direct channel search. [Clear] Clears the channel number. Tune in the channel DDX SERIES DDX616/DDX6046BT/DDX516 English...
  • Page 40: Hd Radio™ Control

    HD Radio™ Control Various control screens appear in the HD Radio Source mode. (only with the optional accessory HD Radio tuner connected) Source Control Screen Switches to the source control screen to use various functions. Display the Source Control Screen See <How to Display the Source Control Screen>...
  • Page 41: Auto Memory

    Auto Memory terminates when 6 stations are stored or when all stations are tuned in. ⁄ • The operation ends automatically if you do not operate within 10 seconds. DDX SERIES DDX616/DDX6046BT/DDX516 Manual Memory Stores the current receiving station in memory. Display the Source Control Screen See <Source Control Screen>...
  • Page 42: Receive Mode

    HD Radio™ Control Receive mode Sets the radio broadcasts receive mode. Display the Source Control Screen See <Source Control Screen> (page 40). Display the Receive mode screen Select the receive mode [Receive Mode] The Receive mode switches in the following order. "Auto": Automatically tunes to analog broadcast when there is no digital broadcast.
  • Page 43: Itunes Tagging (Hd Radio™ Tagging)

    Select the "Tagging Information" display. ⁄ • Up to 50 TAGs (song’s information) can be registered to this unit. When iPod is connected, the TAG information registered to this unit is transferred to the connected iPod. DDX SERIES DDX616/DDX6046BT/DDX516 English...
  • Page 44: Bluetooth Audio Control (Dnx5160/Ddx516)

    Bluetooth Audio Control (DNX5160/DDX516) You can listen to audio files stored in Bluetooth audio player and cell-phone. It is necessary to connect the optional Bluetooth unit KCA-BT200. • You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well.
  • Page 45: Other Functions

    [Space] Enters a space. ⁄ • You can enter characters only after you have applied the parking brake. DDX SERIES DDX616/DDX6046BT/DDX516 Muting Audio Volume upon Reception of Phone Call When a telephone call is received... The Phone Call ("CALL") screen appears, and system is paused.
  • Page 46: Screen Control

    Screen Control Setting the monitor screen. Screen Control Display the Easy Control Screen See <How to Display the Easy Control Screen> (page 17). Display the Screen Control Screen Adjust the picture quality [Bright] Brightness Control [Tint] Tint Control Displayed for an NTSC system image on Video, iPod, or Rear View Camera.
  • Page 47: Hands-Free Phoning

    • Sound output speaker can be set. See Free/Audio Output Setup> (page 72). DDX SERIES DDX616/DDX6046BT/DDX516 Downloading the Phonebook Downloads the phonebook data from the cell-phone to this unit so that you can use the Phonebook of this unit.
  • Page 48: Receiving A Call

    Hands-Free Phoning Receiving a Call ] Answering a Phone Call ] Rejecting an Incoming Call ⁄ • While monitoring the rear view camera, this screen is not displayed even a call comes in. To display this screen, press the [TEL] button or return the shift knob of car to the drive position.
  • Page 49: Making A Call

    Records> (page 51). [Direct Number] Displays the Dialing Display screen. See <Calling by Entering a Phone Number> (page 50). DDX SERIES DDX616/DDX6046BT/DDX516 [Voice] Starts voice recognition. See <Calling by Voice Recognition> (page 51). [BT SETUP] Displays the Bluetooth SETUP screen. See <Registering Bluetooth Unit>...
  • Page 50: Calling By Phonebook

    Hands-Free Phoning Calling by Phonebook You can call a person using his/her phone number that you have registered in the Phonebook. Display the Hands-Free Control screen See <Making a call> (page 49). Display the Phonebook screen Select the name to call 1 Phonebook data list.
  • Page 51: Making A Call Using Call Records

    Missed Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory. DDX SERIES DDX616/DDX6046BT/DDX516 Calling by Voice Recognition Calls by recognizing the registered voice.
  • Page 52: Controlling Tone-Based Services

    Hands-Free Phoning 7 If there are more than one phone numbers assigned under the registered name Say the key word registered for the category When a beep is heard, say the key word within 2 seconds. Make a call 7 If there are more than one phone numbers registered under the same name, go to step 7.
  • Page 53: Setting Up The Hands-Free Phone

    Set each item [Auto Response] Sets an automatic response time to pick-up an incoming call. DNX6960/ DNX6160/ DNX6020EX/ DNX6460BT/ DDX616/ DDX6046BT : "OFF" DNX5160/ DDX516 : "8") "OFF": This function is disabled. "0-99": Sets the incoming call ringing duration (in seconds).
  • Page 54: Voice Registration

    Hands-Free Phoning Voice Registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. Display the Phonebook Detail screen Go through the procedure of <Calling by Phonebook> (page 50). Select the name to register 1 Selects a name.
  • Page 55: Key Word Voice Registration

    Only for DNX5160 and DDX516 with optional Bluetooth unit KCA-BT200 connected. Display voice registration screen DDX SERIES DDX616/DDX6046BT/DDX516 Say the phone category to register (1st try) Say within 2 seconds after the Beep. Say the phone category to register (2nd try) Say within 2 seconds after the Beep.
  • Page 56: Phone Number Preset

    Hands-Free Phoning Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. Display the Hands-Free Control screen See <Making a call> (page 49). Select the Preset number to register 1 sec. ⁄ • If no Preset number is registered, pressing this button momentarily moves to the step 3.
  • Page 57: Sms (Short Message Service)

    ⁄ • If a large number of SMS messages are stored in the cell-phone, message list may not be displayed correctly. DDX SERIES DDX616/DDX6046BT/DDX516 SMS Message screen SMS] Creates a new message for the selected message. Next page 3 English...
  • Page 58 Hands-Free Phoning Create a message Enter phone number / Select contact ] Select a contact from the phonebook. [Direct Number] Enter the phone number. [SET] Display the Create SMS Message screen. [Send] Sends the message. [Delete] Deletes the Draft message. Touching the screen displays a confirmation message.
  • Page 59: Audio Control

    Touch [ Select the Audio Control item Item [Audio Control] [Equalizer] [Tone] [Zone Control] DDX SERIES DDX616/DDX6046BT/DDX516 Audio Control You can adjust the front/rear and right/left audio balance. Display the Audio Control screen Touch [ Set each item 1 Adjusts the front/back and left/right balance of the volume by touching the Adjust screen.
  • Page 60: Equalizer Control

    Audio Control Equalizer Control You can set up the equalizer. Display the Equalizer screen > > Touch [ [Equalizer]. (page 59) Set each item [SystemQ] Selects an equalizer curve type. You can select any of the following equalizer curves. "Natural"/ "Rock"/ "Pop"/ "Easy"/ "Top40"/ "Jazz"/ "User"...
  • Page 61: Zone Control

    [Rear VOL.] Adjusts the volume of the rear channel. ⁄ • There are following limitations when zone function is set to "ON". - There is no output from the subwoofer. - <Equalizer Control> (page 60) and <Speaker Setup> (page 75) are not available. DDX SERIES DDX616/DDX6046BT/DDX516 English...
  • Page 62: Setup Menu

    Setup Menu You can set up various receiver parameters. How to Display SETUP Menu Screen Displays the Setup menu to set various functions. Display the Source Select Screen Display the Setup Menu Screen In this manual, the above selection is indicated >...
  • Page 63: Divx Setup (Dnx6460Bt/Ddx6046Bt)

    DivX Setup (DNX6460BT/DDX6046BT) Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). Display the DivX Setup screen > > Touch [ [Information] (page 62) Displays the registration code. ⁄ • When downloading a DivX VOD file controlled by DRM, register the code appeared on the screen such as the one above.
  • Page 64: User Interface

    Setup Menu User Interface You can setup user interface parameters. Display the User Interface screen > > Touch [ [System] Interface]. (page 62) Set each item [Beep] Turns the key touch tone On or Off. "ON") [Remote Sensor] Selects a remote control signal.
  • Page 65: Touch Panel Adjustment

    Follow the instruction on the screen and touch the center of [Cancel] Cancels the adjustment and returns to the Touch Panel Adjust screen. [Reset] Resets to the initial status. DDX SERIES DDX616/DDX6046BT/DDX516 Clock Setup You can adjust the clock time. Display the Clock Setup screen Touch [...
  • Page 66: Security Indicator Setup

    Setup Menu Security Indicator Setup Setting the security indicator to ON helps to protect your receiver system against theft. Display the Security screen > > Touch [ [System] (page 62) [SI] Turns the SI function on or off. If turned "ON", the security indicator on the front panel flashes when the vehicle ignition is off.
  • Page 67: Entering Background

    Touching the screen displays a confirmation message. Touch [Yes]. To cancel clearing, touch [No]. Quit memorization/recalling of settings DDX SERIES DDX616/DDX6046BT/DDX516 Entering Background Loads a image from the connected USB device and sets it for the background image. Connect the device which has the image...
  • Page 68: Panel Color Coordinate

    Setup Menu Load the image 1 Rotates the image. ⁄ • <About Picture files> (page 6) for readable image specifications. • The [Memory] button on the “Background” screen becomes active only in STANDBY source mode. • Pressing the [Memory] button on the “Background” screen switches the AV OUT source to OFF.
  • Page 69: Screen Adjustment

    Select a Preset number to register 2 sec. Adjusted color is registered to the selected Preset button. Complete the color coordination DDX SERIES DDX616/DDX6046BT/DDX516 Screen Adjustment You can adjust the screen mode of the monitor. Display the Screen Adjust screen >...
  • Page 70: Registering Bluetooth Unit

    Setup Menu Registering Bluetooth Unit Registers the Bluetooth unit to be connected. Display the Bluetooth Setup screen > > Touch [ [Bluetooth SETUP]. (page 62) Display the Connect Device List screen ⁄ • [A2DP Connect Device] Only for DNX5160 and DDX516 with optional Bluetooth unit KCA-BT200 connected.
  • Page 71: Registering Bluetooth Unit Pin Code

    Go through the procedure of <Registering Bluetooth Unit> and complete the registration (pairing) DDX SERIES DDX616/DDX6046BT/DDX516 Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side.
  • Page 72: Bluetooth Unit Connection

    Setup Menu Bluetooth Unit Connection Selects the Bluetooth unit to connect. Display the Bluetooth Setup screen > > Touch [ [Bluetooth SETUP]. (page 62) Display the Connect Device List screen ⁄ • [A2DP Connect Device] Only for DNX5160 and DDX516 with optional Bluetooth unit KCA-BT200 connected.
  • Page 73: Av Input Setup

    [AV-IN Name] One AV-IN name is displayed when "iPod" is selected in [iPod AV Interface Use] and two are displayed when not selected. DDX SERIES DDX616/DDX6046BT/DDX516 AV Interface Setup You can set audio and visual (AV) interface parameters. Display the AV Interface screen...
  • Page 74: Navigation Setup

    When turned "ON", the volume level drops for voice guidance. [Navigation Input] Selects a navigation system connection. "RGB") (DDX series only) "RGB": Allows the Kenwood’s Navigation System to connect via its interface cable. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT1 port.
  • Page 75: Speaker Setup

    "Standard"/ "Wide"/ "Middle"/ "Narrow" ⁄ • Speaker cannot be setup when in STANDBY source mode. DDX SERIES DDX616/DDX6046BT/DDX516 Crossover Network Setup You can set a crossover frequency of speakers. Select the speaker to set the crossover > 1 Sets the High Pass Filter of the front speaker.
  • Page 76: Dvd Setup

    Setup Menu DVD Setup You can set up the DVD play. Display the DVD Setup screen > > Touch [ [DVD SETUP]. (page 62) Set each item [Menu Language]* Selects a disc menu language. (See <DVD Language Setup>, page 77) [Subtitle Language]* Selects a subtitle language.
  • Page 77: Dvd Language Setup

    [Original] Sets the DVD's original language (only when setting an audio language). [Clear] Clears the language code. Set the language you use DDX SERIES DDX616/DDX6046BT/DDX516 DVD Parental Level Setup Sets a parental level. Display the DVD Setup screen >...
  • Page 78: Disc Setup

    Setup Menu Select a parental level and complete the setup Selects a parental level. ⁄ • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc.
  • Page 79: Usb Setup

    USB Playback screen. ( "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. DDX SERIES DDX616/DDX6046BT/DDX516 iPod Setup Performs setup when using iPod. Display the iPod Setup screen Touch [...
  • Page 80: Sirius Parental Code Setup

    Setup Menu SIRIUS Parental Code Setup Sets a SIRIUS Parental code. Display the SIRIUS Setup screen > > Touch [ [SIRIUS SETUP]. (page Display the Parental Code screen ⁄ • If you have already completed the code registration, [Change] is displayed. •...
  • Page 81: Sirius Parental Lock Setup

    SIRIUS Parental Code. In this case, you are requested to input the code once more. DDX SERIES DDX616/DDX6046BT/DDX516 SIRIUS Parental Lock Channel Select Selects the channel to enable SIRIUS Parental lock function.
  • Page 82 Setup Menu Set the parental lock for each channel 1 Channel list 2 Sets the Parental lock function on or off for each channel. You need to input the Parental code to switch the Parental lock function on or off. 3 Displays the sort sequence.
  • Page 83: Remote Controller

    For DNX6960/ DNX6460BT : This unit can be operated using the Remote Controller (RC-DV331) supplied with this unit. For DDX6046BT : This unit can be operated using the Remote Controller (RC-DV340) supplied with this unit. For DNX6160/ DNX6020EX/ DNX5160/ DDX616/ DDX516 : Optional Remote Controller KNA-RCDV331/ KNA-RCDV340 is designed for controlling this unit.
  • Page 84: Remote Controller Mode Switch

    Remote Controller Remote Controller mode switch The functions operated from the remote controller differ depending on the position of the mode switch. [RC-DV331] AUD mode Switch to this mode when controlling a selected source or tuner source, etc. DVD mode Switch to this mode when playing DVDs or CDs etc.
  • Page 85: Dvd/Vcd (Dvd Mode)

    Switches the screen mode. Screen mode changes each time you press this key. MODE FNC/PBC TOP MENU MENU AUDIO SUBTITLE DDX SERIES DDX616/DDX6046BT/DDX516 DVD/VCD (DVD mode) [RC-DV331] Track search and file search AUD• DVD• ENTER T V• Selects the track or file to be played.
  • Page 86 Remote Controller VCD 1.X, VCD 2.X (PBC OFF) Track number Cancel VCD 2.X (PBC ON) Scene number Number Cancel Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [ENTER] key. Numeric keypad CLEAR •...
  • Page 87: Music Cd/Audio File/Video File/ Picture File

    Cancel Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [38] key. DDX SERIES DDX616/DDX6046BT/DDX516 Numeric keypad • Specify the number to search in direct search. OPEN Radio (AUD mode)
  • Page 88: Ipod (Aud Mode)

    Remote Controller Example: 92.1MHz (FM) WXYZ « Example: 810kHz (AM) « Numeric keypad CLEAR • To use preset tuning, press the number of a programmed broadcast station. ( • Press the direct tuning key first, then specify the frequency of the station to receive. DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160 iPod (AUD mode) WXYZ...
  • Page 89: Nav (Nav Mode) (Rc-Dv331 Only)

    Zooms in or out the navigation map. MENU Displays Main menu. CANCEL Displays previous screen. POSITION Displays the current position. DDX SERIES DDX616/DDX6046BT/DDX516 ROUTE M Displays Route Option menu. VIEW Switches between 2D and 3D map displays. VOICE Plays Voice guidance.
  • Page 90: Initial Setup

    Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup Turn the power On Set each item [Language] Select the language used for the control screen and setting items. (page 64) [iPod AV Interface Use] Sets the terminal to which the iPod is connected to.
  • Page 91: Status Bar Indicator Items

    "VER2" Indicates that the Video CD version is 2. "REP" Indicates that the Repeat function is ON. DDX SERIES DDX616/DDX6046BT/DDX516 Source Display Overview "FO-REP" Indicates that the Folder repeat function is ON. "MOVIE" Identifies the video file. "MUSIC" Identifies the music file.
  • Page 92: Dvd Language Codes

    DVD Language Codes Code Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic...
  • Page 93: Help? Troubleshooting

    ☞ <Zone Control> (page 61) The unit is set to STANDBY source. DDX SERIES DDX616/DDX6046BT/DDX516 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.
  • Page 94: Help? Error

    "Mecha Error" : The disc player is malfunctioning. ➡ Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. "Disc Error" : Disc is quite dirty.
  • Page 95 ➡ Check the connection of the antenna. "CH Unavailable" : The selected channel is invalid. ➡ Select a different channel. "CH Unauthorized" : The selected channel is not subscribed. DDX SERIES DDX616/DDX6046BT/DDX516 "Off Air" : The broadcast of the selected channel has finished. English...
  • Page 96: Specifications

    : MPEG1/ MPEG2/ DivX (DNX6460BT/DDX6046BT) Audio Decoder : MP3/ WMA/ AAC/ WAV Bluetooth section (DNX6960/ DNX6160/ DNX6020EX/ DNX6460BT/ DDX616/ DDX6046BT) Technology : Bluetooth Ver. 2.0 Certified Frequency : 2.402 – 2.480 GHz Output Power : +4 dBm (MAX), 0 dBm (AVE), Power Class2 Maximum Communication range : Line of sight approx.
  • Page 97 AM tuner section Frequency Range (10 kHz) : 530 kHz – 1700 kHz Usable Sensitivity : 28 dBμ DDX SERIES DDX616/DDX6046BT/DDX516 Video section Color System of External Video Input : NTSC External Video Input Level (mini jack) : 1 Vp-p/ 75 Ω...
  • Page 98 Specifications Navigation section (DNX series) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view of the sky) Accuracy Position : <...
  • Page 99 DivX® is a registered trademark of DivX, Inc., and is under license. DNX6960/DNX6160/DNX6020EX/DNX6460BT/DDX616/DDX6046BT: The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • Page 100 Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.

Table of Contents